Hi
sorry I misunderstand something. I download the ppc-2008-04-01.iso and run "./MAKEALL" without any argument. that why it compile 300+ boards. I should read MAKEALL more carefully.
now I am downloading "mips-2007-01-21.iso".
my board is mips EL system. is that mean when I run "MAKEALL" I just need add mips_el?? like this one[1]
another question: I found this in "MAKEALL": LIST_au1xx0_el=" \ dbau1550_el \ pb1000 \ " it shows that those two boards are Endianess Little System but in board/pb1x00/u-boot.lds , board/dbau1x00/u-boot.lds line:27[2] show that those two boards are both BE system? is there something wrong or I misunderstand something
thanks for all your reply.
[2] OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
[1] CROSS_COMPILE=mipsel-openwrt-linux- BUILD_DIR=../u-boot-build MAKEALL_LOGDIR=../u-boot-log ./MAKEALL mips_el
On 07/20/2010 05:37 PM, Wolfgang Denk wrote:
Dear Xiangfu Liu,
In message4C453325.4080003@openmobilefree.net you wrote:
which compiler in ELDK if for the mips_el system?
GCC, of course :-)
I guess there are some different between ELDK cross compiler and OpenWrt cross compiler. so I want try ELDK cross compiler with my board.
You can download the installation image at ftp://ftp.denx.de/pub/eldk/4.1/mips-linux-x86/iso/mips-2007-01-21.iso
by the way, here[2] is the error message with OpenWrt's cross compiler.
...
mipsel-openwrt-linux-ld -g -Ttext 0x80200000 -T mips.lds \ -o hello_world -e hello_world hello_world.o libstubs.a \ -L/home/xiangfu/workspace/PanGu/openwrt-xburst/staging_dir/toolchain-mipsel_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib/gcc/mipsel-openwrt-linux-uclibc/4.3.3 -lgcc mipsel-openwrt-linux-ld: hello_world.o: compiled for a little endian system and target is big endian
Well, the "el" in "mipsel-..." mean "Endianess Little".
You cannot use these tools to build code for a BE system.
Best regards,
Wolfgang Denk