[U-Boot] DUTS: missing pieces for a beginner

Hi

I would like to do some more extensive tests with the U-boot and took a look at http://www.denx.de/wiki/DUTS/DUTSDocs

I think that the wiki is somehow out of date as examples as the following a) ./duts b should be rewritten to /duts -showconfig ? Is this true?

b) ./duts -showconfig v38b gives on my system the following output:

Skipping testcase UBootDateHelp because of unfulfilled requirement 'rtc' Skipping testcase UBootDate because of unfulfilled requirement 'rtc' Skipping testcase UBootSleepRTC because of unfulfilled requirement 'rtc' Skipping testcase UBootCmdDttHelp because of unfulfilled requirement 'dtt' Skipping testcase UBootCmdDtt because of unfulfilled requirement 'dtt' Skipping testcase UBootI2cHelp because of unfulfilled requirement 'i2c' Skipping testcase UBootIdeHelp because of unfulfilled requirement 'ide' Skipping testcase UBootDiskbootHelp because of unfulfilled requirement 'ide' Skipping testcase UBootNandHelp because of unfulfilled requirement 'nand' Skipping testcase UBootNandInfo because of unfulfilled requirement 'nand' Skipping testcase UBootNandBad because of unfulfilled requirement 'nand' Skipping testcase UBootNandErase because of unfulfilled requirement 'nand' Skipping testcase UBootNandWrite because of unfulfilled requirement 'nand' Skipping testcase UBootNandRead because of unfulfilled requirement 'nand' Details for configuration view '_default' Kernel context 'linux'

           prompt "# "
           alt_prompt "~> "
           image "/tftpboot/$BOARD/uImage-duts"
           descr "config/VL_linux_context.tcl"

Firmware context 'u-boot'

           prompt "=> "
           image "/tftpboot/$BOARD/u-boot.bin-duts"
           descr "config/VL_uboot_context.tcl"

Host context 'host'

           prompt "]$ "
           descr "config/VL_host_context.tcl"
           shell "bash"

c) "./duts lt" should be rewritten as "./duts -tc ? v38b" d) "./duts -d testsystems/ltp/ lt" shoud be rewritten to "./duts -td testsystems/ltp -tc ? v38b"

I would volunteer to update the wiki if somebody can confirm that my observations are correct.

Even looking for an hour or so at the sources. I am unable to find an answer which files I should modify to run tests for my sequoia board.

My setup ist that $ /user/local/bin power 1 on powers up the 5V input of my sequoia board and under /dev/ttyUSB3 I see the U- Boot output after power on.

I would like to start with a simple testcase and tried running

This gives me the following output

Testcases directory: ./testsystems/dulg Selected config: _default List of selected test cases: UBootBaseHelp

##################################### # running test case: UBootBaseHelp #####################################

ERROR: couldn't spawn 'connect'?!

I would appreciate any hints. As the section "I"ntroducing suppport for a new VL " is just a little be too small for me. E.g. how can I add a new VL. Is there an example I just can copy and adjust it? Where do I specify the tty device for the sequoia?

Best regards