There is a need to fill node before clk_output_sel is setup.
Signed-off-by: Michal Simek michal.simek@xilinx.com Acked-by: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com ---
drivers/net/phy/ti.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c index 6db6edd0d0c8..10989dd40309 100644 --- a/drivers/net/phy/ti.c +++ b/drivers/net/phy/ti.c @@ -216,6 +216,10 @@ static int dp83867_of_init(struct phy_device *phydev)
/* Optional configuration */
+ node = phy_get_ofnode(phydev); + if (!ofnode_valid(node)) + return -EINVAL; + /* * Keep the default value if ti,clk-output-sel is not set * or to high @@ -225,10 +229,6 @@ static int dp83867_of_init(struct phy_device *phydev) ofnode_read_u32_default(node, "ti,clk-output-sel", DP83867_CLK_O_SEL_REF_CLK);
- node = phy_get_ofnode(phydev); - if (!ofnode_valid(node)) - return -EINVAL; - if (ofnode_read_bool(node, "ti,max-output-impedance")) dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX; else if (ofnode_read_bool(node, "ti,min-output-impedance"))