The malloc buffer is not large enough to hold a flash sector (0x20000 bytes) in addition to whatever else it normally holds, so double its size. This fixes a failure trying to save the environment:
=> save Saving Environment to Flash... Unable to save the rest of sector (122880) . done Protected 1 sectors
This problem probably surfaced from some other change that significantly increased the normal memory usage, thereby not leaving enough room for the saveenv command.
Signed-off-by: Timur Tabi timur@freescale.com --- include/configs/MPC832XEMDS.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 4ed5a97..6f8622c 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -181,7 +181,7 @@
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
/* * Initial RAM Base Address Setup