From: Peng Fan peng.fan@nxp.com
All i.MX8M needs TZASC ID SWAP set and locked, no need the check to waste cpu cycles.
Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/mach-imx/imx8m/soc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 8e23e6da326..5240dc11363 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -72,15 +72,13 @@ void enable_tzc380(void) * According to TRM, TZASC_ID_SWAP_BYPASS should be set in * order to avoid AXI Bus errors when GPU is in use */ - if (is_imx8mq() || is_imx8mm() || is_imx8mn() || is_imx8mp()) - setbits_le32(&gpr->gpr[10], GPR_TZASC_ID_SWAP_BYPASS); + setbits_le32(&gpr->gpr[10], GPR_TZASC_ID_SWAP_BYPASS);
/* * imx8mn and imx8mp implements the lock bit for * TZASC_ID_SWAP_BYPASS, enable it to lock settings */ - if (is_imx8mn() || is_imx8mp()) - setbits_le32(&gpr->gpr[10], GPR_TZASC_ID_SWAP_BYPASS_LOCK); + setbits_le32(&gpr->gpr[10], GPR_TZASC_ID_SWAP_BYPASS_LOCK);
/* * set Region 0 attribute to allow secure and non-secure