Hi Suniel,
Any idea bout ChenYu's comment?
Thanks,
- Kever
On 2020/5/23 上午10:07, Chen-Yu Tsai wrote:
Hi,
On Sat, May 23, 2020 at 2:04 AM sunil@amarulasolutions.com wrote:
From: Suniel Mahesh sunil@amarulasolutions.com
This patch series adds runtime detection of add-on board(ROC-RK3399-PC Mezzanine) by enabling I2C in SPL. This add on board hosts a CW2015 chip which is connected as slave to I2C2. In order to dynamically detect this add-on board at runtime, I2C2 is probed in SPL. If probe is successfull then a corresponding dtb is loaded, else regular dtb is loaded for the u-boot proper.
Patch #1 moves board initialiation code after rk3399 init is done. Patch #2 enables I2C in SPL for any add-on board detection at run time. Patch #3 adds support for add-on board run-time detection. Patch #4 drops ROC-RK3399-PC Mezzanine board as this is an add-on board, it will be detected at runtime. Patch #5 enables PCIe/M.2 and NVMe, as this add-on board has a PCIe/M.2.
Jagan Teki (1): rockchip: spl: Move board_early_init_f after cpu timer
Suniel Mahesh (4): roc-pc-rk3399: Enable I2C in SPL for add-on board detection roc-pc-rk3399: Add support for add-on board run-time detection rk3399: drop ROC-RK3399-PC Mezzanine board roc-pc-rk3399: Enable PCIe/M.2, NVMe
arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 13 +++++ arch/arm/mach-rockchip/spl.c | 5 +- board/firefly/roc-pc-rk3399/MAINTAINERS | 2 - board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 56 ++++++++++++++++++++++ configs/roc-pc-mezzanine-rk3399_defconfig | 74 -----------------------------
FYI this is going to be problematic for people that have the non-POE version of the mezzanine board and still want to access NVMe from U-boot. Maybe worth keeping a target for these people to use.
ChenYu
configs/roc-pc-rk3399_defconfig | 10 +++- 6 files changed, 81 insertions(+), 79 deletions(-) delete mode 100644 configs/roc-pc-mezzanine-rk3399_defconfig
-- 2.7.4