On 1 October 2015 at 10:48, Sjoerd Simons sjoerd.simons@collabora.co.uk wrote:
Add support for the gmac ethernet interface to pinctrl. This hardcodes the setup to match that of the firefly and Radxa Rock2 boards, using the RGMII phy mode for gmac interface and GPIO4B0 as the phy reset GPIO.
Signed-off-by: Sjoerd Simons sjoerd.simons@collabora.co.uk
arch/arm/include/asm/arch-rockchip/grf_rk3288.h | 228 ++++++++++++++++++++++++ arch/arm/include/asm/arch-rockchip/periph.h | 1 + drivers/pinctrl/rockchip/pinctrl_rk3288.c | 102 +++++++++++ 3 files changed, 331 insertions(+)
diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3288.h b/arch/arm/include/asm/arch-rockchip/grf_rk3288.h index 0117a17..b7dda47 100644 --- a/arch/arm/include/asm/arch-rockchip/grf_rk3288.h +++ b/arch/arm/include/asm/arch-rockchip/grf_rk3288.h @@ -283,6 +283,163 @@ enum { GPIO3C0_EMMC_CMD, };
+/* GRF_GPIO3DL_IOMUX */ +enum {
GPIO3D3_SHIFT = 12,GPIO3D3_MASK = 7,GPIO3D3_GPIO = 0,GPIO3D3_FLASH1_DATA3,GPIO3D3_HOST_DOUT3,GPIO3D3_MAC_RXD3,GPIO3D3_SDIO1_DATA3,GPIO3D2_SHIFT = 8,GPIO3D2_MASK = 7,GPIO3D2_GPIO = 0,GPIO3D2_FLASH1_DATA2,GPIO3D2_HOST_DOUT2,GPIO3D2_MAC_RXD2,GPIO3D2_SDIO1_DATA2,GPIO3D1_SHIFT = 4,GPIO3D1_MASK = 7,GPIO3D1_GPIO = 0,GPIO3DL1_FLASH1_DATA1,GPIO3D1_HOST_DOUT1,GPIO3D1_MAC_TXD3,GPIO3D1_SDIO1_DATA1,GPIO3D0_SHIFT = 0,GPIO3D0_MASK = 7,GPIO3D0_GPIO = 0,GPIO3D0_FLASH1_DATA0,GPIO3D0_HOST_DOUT0,GPIO3D0_MAC_TXD2,GPIO3D0_SDIO1_DATA0,+};
+/* GRF_GPIO3HL_IOMUX */ +enum {
GPIO3D7_SHIFT = 12,GPIO3D7_MASK = 7,GPIO3D7_GPIO = 0,GPIO3D7_FLASH1_DATA7,GPIO3D7_HOST_DOUT7,GPIO3D7_MAC_RXD1,GPIO3D7_SDIO1_INTN,GPIO3D6_SHIFT = 8,GPIO3D6_MASK = 7,GPIO3D6_GPIO = 0,GPIO3D6_FLASH1_DATA6,GPIO3D6_HOST_DOUT6,GPIO3D6_MAC_RXD0,GPIO3D6_SDIO1_BKPWR,GPIO3D5_SHIFT = 4,GPIO3D5_MASK = 7,GPIO3D5_GPIO = 0,GPIO3D5_FLASH1_DATA5,GPIO3D5_HOST_DOUT5,GPIO3D5_MAC_TXD1,GPIO3D5_SDIO1_WRPRT,GPIO3D4_SHIFT = 0,GPIO3D4_MASK = 7,GPIO3D4_GPIO = 0,GPIO3D4_FLASH1_DATA4,GPIO3D4_HOST_DOUT4,GPIO3D4_MAC_TXD0,GPIO3D4_SDIO1_DETECTN,+};
+/* GRF_GPIO4AL_IOMUX */ +enum {
GPIO4A3_SHIFT = 12,GPIO4A3_MASK = 7,GPIO4A3_GPIO = 0,GPIO4A3_FLASH1_ALE,GPIO4A3_HOST_DOUT9,GPIO4A3_MAC_CLK,GPIO4A3_FLASH0_CSN6,GPIO4A2_SHIFT = 8,GPIO4A2_MASK = 7,GPIO4A2_GPIO = 0,GPIO4A2_FLASH1_RDN,GPIO4A2_HOST_DOUT8,GPIO4A2_MAC_RXER,GPIO4A2_FLASH0_CSN5,GPIO4A1_SHIFT = 4,GPIO4A1_MASK = 7,GPIO4A1_GPIO = 0,GPIO4A1_FLASH1_WP,GPIO4A1_HOST_CKOUTN,GPIO4A1_MAC_TXDV,GPIO4A1_FLASH0_CSN4,GPIO4A0_SHIFT = 0,GPIO4A0_MASK = 3,GPIO4A0_GPIO = 0,GPIO4A0_FLASH1_RDY,GPIO4A0_HOST_CKOUTP,GPIO4A0_MAC_MDC,+};
+/* GRF_GPIO4AH_IOMUX */ +enum {
GPIO4A7_SHIFT = 12,GPIO4A7_MASK = 7,GPIO4A7_GPIO = 0,GPIO4A7_FLASH1_CSN1,GPIO4A7_HOST_DOUT13,GPIO4A7_MAC_CSR,GPIO4A7_SDIO1_CLKOUT,GPIO4A6_SHIFT = 8,GPIO4A6_MASK = 7,GPIO4A6_GPIO = 0,GPIO4A6_FLASH1_CSN0,GPIO4A6_HOST_DOUT12,GPIO4A6_MAC_RXCLK,GPIO4A6_SDIO1_CMD,GPIO4A5_SHIFT = 4,GPIO4A5_MASK = 3,GPIO4A5_GPIO = 0,GPIO4A5_FLASH1_WRN,GPIO4A5_HOST_DOUT11,GPIO4A5_MAC_MDIO,GPIO4A4_SHIFT = 0,GPIO4A4_MASK = 7,GPIO4A4_GPIO = 0,GPIO4A4_FLASH1_CLE,GPIO4A4_HOST_DOUT10,GPIO4A4_MAC_TXEN,GPIO4A4_FLASH0_CSN7,+};
+/* GRF_GPIO4BL_IOMUX */ +enum {
GPIO4B1_SHIFT = 4,GPIO4B1_MASK = 7,GPIO4B1_GPIO = 0,GPIO4B1_FLASH1_CSN2,GPIO4B1_HOST_DOUT15,GPIO4B1_MAC_TXCLK,GPIO4B1_SDIO1_PWREN,GPIO4B0_SHIFT = 0,GPIO4B0_MASK = 7,GPIO4B0_GPIO = 0,GPIO4B0_FLASH1_DQS,GPIO4B0_HOST_DOUT14,GPIO4B0_MAC_COL,GPIO4B0_FLASH1_CSN3,+};
/* GRF_GPIO4C_IOMUX */ enum { GPIO4C7_SHIFT = 14, @@ -718,6 +875,40 @@ enum { MSCH0_MAINPARTIALPOP_MASK = 1, };
+/* GRF_SOC_CON1 */ +enum {
RMII_MODE_SHIFT = 0xe,RMII_MODE_MASK = 1,RMII_MODE = 1,GMAC_CLK_SEL_SHIFT = 0xc,GMAC_CLK_SEL_MASK = 3,GMAC_CLK_SEL_125M = 0,GMAC_CLK_SEL_25M,GMAC_CLK_SEL_2_5M,RMII_CLK_SEL_SHIFT = 0xb,RMII_CLK_SEL_MASK = 1,RMII_CLK_SEL_2_5M = 0,RMII_CLK_SEL_25M,GMAC_SPEED_SHIFT = 0xa,GMAC_SPEED_MASK = 1,GMAC_SPEED_10M = 0,GMAC_SPEED_100M,GMAC_FLOWCTRL_SHIFT = 0x9,GMAC_FLOWCTRL_MASK = 1,GMAC_PHY_INTF_SEL_SHIFT = 0x6,GMAC_PHY_INTF_SEL_MASK = 0x7,GMAC_PHY_INTF_SEL_RGMII = 0x1,GMAC_PHY_INTF_SEL_RMII = 0x4,HOST_REMAP_SHIFT = 0x5,HOST_REMAP_MASK = 1+};
/* GRF_SOC_CON2 */ enum { UPCTL1_LPDDR3_ODT_EN_SHIFT = 0xd, @@ -765,4 +956,41 @@ enum { PWM_PWM = 0, };
+/* GRF_SOC_CON3 */ +enum {
RXCLK_DLY_ENA_GMAC_SHIFT = 0xf,RXCLK_DLY_ENA_GMAC_MASK = 1,RXCLK_DLY_ENA_GMAC_DISABLE = 0,RXCLK_DLY_ENA_GMAC_ENABLE,TXCLK_DLY_ENA_GMAC_SHIFT = 0xe,TXCLK_DLY_ENA_GMAC_MASK = 1,TXCLK_DLY_ENA_GMAC_DISABLE = 0,TXCLK_DLY_ENA_GMAC_ENABLE,CLK_RX_DL_CFG_GMAC_SHIFT = 0x7,CLK_RX_DL_CFG_GMAC_MASK = 0x7f,CLK_TX_DL_CFG_GMAC_SHIFT = 0x0,CLK_TX_DL_CFG_GMAC_MASK = 0x7f,+};
+/* GPIO Bias settings */ +#define GPIO_BIAS_BITS 2 +#define GPIO_BIAS_MASK(x) (0x3 << (GPIO_BIAS_BITS * x))
+#define GPIO_BIAS_2mA(x) (0x0 << (GPIO_BIAS_BITS * x)) +#define GPIO_BIAS_4mA(x) (0x1 << (GPIO_BIAS_BITS * x)) +#define GPIO_BIAS_8mA(x) (0x2 << (GPIO_BIAS_BITS * x)) +#define GPIO_BIAS_12mA(x) (0x3 << (GPIO_BIAS_BITS * x))
I'd really like to avoid these sorts of things. Instead:
enum { GPIO_BIAS_2MA = 0, GPIO_BIAS_4MA, ...
#define GPIO_BIAS_SHIFT(x) ((x) * 2)
Then:
rk_clrsetreg(&grf->gpio1_e[2][3], + GPIO_BIAS_16MA << GPIO_BIAS_SHIFT(1))
or similar. In other words follow the code that is there.
+/* GPIO PU/PD settings */ +#define GPIO_PULL_BITS 2 +#define GPIO_PULL_MASK(x) (0x3 << (GPIO_PULL_BITS * x))
+#define GPIO_PULL_NORMAL(x) (0x0 << (GPIO_PULL_BITS * x)) +#define GPIO_PULL_UP(x) (0x1 << (GPIO_PULL_BITS * x)) +#define GPIO_PULL_DOWN(x) (0x2 << (GPIO_PULL_BITS * x)) +#define GPIO_PULL_REPEAT(x) (0x3 << (GPIO_PULL_BITS * x))
#endif diff --git a/arch/arm/include/asm/arch-rockchip/periph.h b/arch/arm/include/asm/arch-rockchip/periph.h index fa6069b..239a274 100644 --- a/arch/arm/include/asm/arch-rockchip/periph.h +++ b/arch/arm/include/asm/arch-rockchip/periph.h @@ -38,6 +38,7 @@ enum periph_id { PERIPH_ID_SDMMC1, PERIPH_ID_SDMMC2, PERIPH_ID_HDMI,
PERIPH_ID_GMAC, PERIPH_ID_COUNT,diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3288.c b/drivers/pinctrl/rockchip/pinctrl_rk3288.c index c432a00..e59f771 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3288.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3288.c @@ -298,6 +298,103 @@ static void pinctrl_rk3288_sdmmc_config(struct rk3288_grf *grf, int mmc_id) } }
+static void pinctrl_rk3288_gmac_config(struct rk3288_grf *grf, int gmac_id) +{
switch (gmac_id) {case PERIPH_ID_GMAC:rk_clrsetreg(&grf->gpio3dl_iomux,GPIO3D3_MASK << GPIO3D3_SHIFT |GPIO3D2_MASK << GPIO3D2_SHIFT |GPIO3D2_MASK << GPIO3D1_SHIFT |GPIO3D0_MASK << GPIO3D0_SHIFT,GPIO3D3_MAC_RXD3 << GPIO3D3_SHIFT |GPIO3D2_MAC_RXD2 << GPIO3D2_SHIFT |GPIO3D1_MAC_TXD3 << GPIO3D1_SHIFT |GPIO3D0_MAC_TXD2 << GPIO3D0_SHIFT);rk_clrsetreg(&grf->gpio3dh_iomux,GPIO3D7_MASK << GPIO3D7_SHIFT |GPIO3D6_MASK << GPIO3D6_SHIFT |GPIO3D5_MASK << GPIO3D5_SHIFT |GPIO3D4_MASK << GPIO3D4_SHIFT,GPIO3D7_MAC_RXD1 << GPIO3D7_SHIFT |GPIO3D6_MAC_RXD0 << GPIO3D6_SHIFT |GPIO3D5_MAC_TXD1 << GPIO3D5_SHIFT |GPIO3D4_MAC_TXD0 << GPIO3D4_SHIFT);/* switch the Tx pins to 12ma drive-strength */rk_clrsetreg(&grf->gpio1_e[2][3],GPIO_BIAS_MASK(0) | GPIO_BIAS_MASK(1) |GPIO_BIAS_MASK(4) | GPIO_BIAS_MASK(5),GPIO_BIAS_12mA(0) | GPIO_BIAS_12mA(1) |GPIO_BIAS_12mA(4) | GPIO_BIAS_12mA(5));/* Set normal pull for all GPIO3D pins */rk_clrsetreg(&grf->gpio1_p[2][3],GPIO_PULL_MASK(0) | GPIO_PULL_MASK(1) |GPIO_PULL_MASK(2) | GPIO_PULL_MASK(3) |GPIO_PULL_MASK(4) | GPIO_PULL_MASK(5) |GPIO_PULL_MASK(6) | GPIO_PULL_MASK(7),GPIO_PULL_NORMAL(0) | GPIO_PULL_NORMAL(1) |GPIO_PULL_NORMAL(2) | GPIO_PULL_NORMAL(3) |GPIO_PULL_NORMAL(4) | GPIO_PULL_NORMAL(5) |GPIO_PULL_NORMAL(6) | GPIO_PULL_NORMAL(7));rk_clrsetreg(&grf->gpio4al_iomux,GPIO4A3_MASK << GPIO4A3_SHIFT |GPIO4A1_MASK << GPIO4A1_SHIFT |GPIO4A0_MASK << GPIO4A0_SHIFT,GPIO4A3_MAC_CLK << GPIO4A3_SHIFT |GPIO4A1_MAC_TXDV << GPIO4A1_SHIFT |GPIO4A0_MAC_MDC << GPIO4A0_SHIFT);rk_clrsetreg(&grf->gpio4ah_iomux,GPIO4A6_MASK << GPIO4A6_SHIFT |GPIO4A5_MASK << GPIO4A5_SHIFT |GPIO4A4_MASK << GPIO4A4_SHIFT,GPIO4A6_MAC_RXCLK << GPIO4A6_SHIFT |GPIO4A5_MAC_MDIO << GPIO4A5_SHIFT |GPIO4A4_MAC_TXEN << GPIO4A4_SHIFT);/* switch GPIO4A4 to 12ma drive-strength */rk_clrsetreg(&grf->gpio1_e[3][0],GPIO_BIAS_MASK(4),GPIO_BIAS_12mA(4));/* Set normal pull for all GPIO4A pins */rk_clrsetreg(&grf->gpio1_p[3][0],GPIO_PULL_MASK(0) | GPIO_PULL_MASK(1) |GPIO_PULL_MASK(2) | GPIO_PULL_MASK(3) |GPIO_PULL_MASK(4) | GPIO_PULL_MASK(5) |GPIO_PULL_MASK(6) | GPIO_PULL_MASK(7),GPIO_PULL_NORMAL(0) | GPIO_PULL_NORMAL(1) |GPIO_PULL_NORMAL(2) | GPIO_PULL_NORMAL(3) |GPIO_PULL_NORMAL(4) | GPIO_PULL_NORMAL(5) |GPIO_PULL_NORMAL(6) | GPIO_PULL_NORMAL(7));/* Assuming GPIO4B0_GPIO is phy-reset*/
Space before */
rk_clrsetreg(&grf->gpio4bl_iomux,GPIO4B1_MASK << GPIO4B1_SHIFT |GPIO4B0_MASK << GPIO4B0_SHIFT,GPIO4B1_MAC_TXCLK << GPIO4B1_SHIFT|GPIO4B0_GPIO << GPIO4B0_SHIFT);
Would this normally be handled by a GPIO? Does it belong in pinmux?
/* switch GPIO4B1 to 12ma drive-strength */rk_clrsetreg(&grf->gpio1_e[3][1],GPIO_BIAS_MASK(1),GPIO_BIAS_12mA(1));/* Set pull normal for GPIO4B1, pull up for GPIO4B0 */rk_clrsetreg(&grf->gpio1_p[3][1],GPIO_PULL_MASK(0) | GPIO_PULL_MASK(1),GPIO_PULL_UP(0) | GPIO_PULL_NORMAL(1));break;default:debug("gmac id = %d iomux error!\n", gmac_id);break;}+}
static void pinctrl_rk3288_hdmi_config(struct rk3288_grf *grf, int hdmi_id) { switch (hdmi_id) { @@ -354,6 +451,9 @@ static int rk3288_pinctrl_request(struct udevice *dev, int func, int flags) case PERIPH_ID_SDMMC1: pinctrl_rk3288_sdmmc_config(priv->grf, func); break;
case PERIPH_ID_GMAC:pinctrl_rk3288_gmac_config(priv->grf, func);break; case PERIPH_ID_HDMI: pinctrl_rk3288_hdmi_config(priv->grf, func); break;@@ -376,6 +476,8 @@ static int rk3288_pinctrl_get_periph_id(struct udevice *dev, return -EINVAL;
switch (cell[1]) {
case 27:return PERIPH_ID_GMAC; case 44: return PERIPH_ID_SPI0; case 45:-- 2.5.3
Regards, Simon