Am 19.12.19 um 16:08 schrieb Stefan Roese:
Hi Mauro,
On 19.12.19 12:40, MCon wrote:
modified: arch/mips/dts/Makefile Add support for creation of vocore2.dtb move creation of gardena-smart-gateway-mt7688.dtb and linkit-smart-7688.dtb to more specific setting.
new file: arch/mips/dts/vocore2.dts modified: arch/mips/mach-mtmips/Kconfig new file: board/vonger/vocore2/Kconfig KConfig support for board VoCore2.
new file: board/vonger/vocore2/Makefile new file: board/vonger/vocore2/board.c Board initialization (largely copied from existing).
new file: configs/vocore2_defconfig new file: include/configs/vocore2.h Board settings (WIP).
This is a pretty uncommon commit text for a new board port. Please don't add just a summary of which files are changed or added. Better describe the newly added board with its supported (and perhaps not yet supported) features. As an example, here the commit text for the GARDENA board:
The Gardena Smart-Gateway boards have a MT7688 SoC with 128 MiB of RAM and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND storage. This patch also includes 2 targets. One is the target that can be programmed into the SPI NOR flash and a 2nd target "xxx-ram" is added to support loading and booting via an already running U-Boot version. This allows easy development and testing without the need to flash the image each time.
Just an example of course.
Please find some further review comments below inline.
Signed-off-by: MCon mc5686@mclink.it
Please use your name with the email address:
Signed-off-by: Mauro Condarelli mc5686@mclink.it
yes, please also fix your Git config accordingly (git config [--global] user.email "Mauro Condarelli mc5686@mclink.it").
arch/mips/dts/Makefile | 6 ++-- arch/mips/dts/vocore2.dts | 62 +++++++++++++++++++++++++++++++++++ arch/mips/mach-mtmips/Kconfig | 9 +++++ board/vonger/vocore2/Kconfig | 11 +++++++ board/vonger/vocore2/Makefile | 2 ++ board/vonger/vocore2/board.c | 35 ++++++++++++++++++++ configs/vocore2_defconfig | 61 ++++++++++++++++++++++++++++++++++ include/configs/vocore2.h | 57 ++++++++++++++++++++++++++++++++ 8 files changed, 240 insertions(+), 3 deletions(-) create mode 100644 arch/mips/dts/vocore2.dts create mode 100644 board/vonger/vocore2/Kconfig create mode 100644 board/vonger/vocore2/Makefile create mode 100644 board/vonger/vocore2/board.c create mode 100644 configs/vocore2_defconfig create mode 100644 include/configs/vocore2.h
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index c9d75596f2..664505ee00 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -1,8 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+ -dtb-$(CONFIG_ARCH_MTMIPS) += \ - gardena-smart-gateway-mt7688.dtb \ - linkit-smart-7688.dtb dtb-$(CONFIG_TARGET_AP121) += ap121.dtb dtb-$(CONFIG_TARGET_AP143) += ap143.dtb dtb-$(CONFIG_TARGET_AP152) += ap152.dtb @@ -16,12 +13,15 @@ dtb-$(CONFIG_BOARD_COMTREND_AR5387UN) += comtrend,ar-5387un.dtb dtb-$(CONFIG_BOARD_COMTREND_CT5361) += comtrend,ct-5361.dtb dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb +dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb +dtb-$(CONFIG_BOARD_LINKIT._SMART_7688) += linkit-smart-7688.dtb
this is an unrelated change and should be removed. I guess this was intentional by Stefan. If not, please submit a separate patch for that.
dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb dtb-$(CONFIG_BOARD_SFR_NB4_SER) += sfr,nb4-ser.dtb dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb +dtb-$(CONFIG_BOARD_VOCORE2) += vocore2.dtb
you should add the vendor name, e.g.
dtb-$(CONFIG_BOARD_VONGER_VOCORE2) += vonger_vocore2.dtb
dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb diff --git a/arch/mips/dts/vocore2.dts b/arch/mips/dts/vocore2.dts new file mode 100644 index 0000000000..cdcd9b4e1d --- /dev/null +++ b/arch/mips/dts/vocore2.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2019 Mauro Condarelli mc5686@mclink.it
- */
+/dts-v1/; +#include "mt7628a.dtsi"
+/ { + compatible = "vocore,vocore2", "ralink,mt7628a-soc"; + model = "VoCore2";
+ aliases { + serial0 = &uart2; + spi0 = &spi0; + };
+ memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + };
+ chosen { + bootargs = "console=ttyS2,115200"; + stdout-path = &uart2; + }; +};
+&pinctrl { + state_default: pin_state { + p0led { + groups = "p0led_a"; + function = "led"; + }; + }; +};
+&uart2 { + status = "okay"; +};
+&spi0 { + status = "okay"; + nor0: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + spi-max-frequency = <10000000>; + reg = <0x0>; + m25p,chunked-io = <32>; + }; +};
+ð { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_iot_mode>; + mediatek,poll-link-phy = <0>; +};
+&mmc { + status = "okay"; +}; diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig index c8dcf19c0d..5ea260232f 100644 --- a/arch/mips/mach-mtmips/Kconfig +++ b/arch/mips/mach-mtmips/Kconfig @@ -43,6 +43,14 @@ config BOARD_LINKIT_SMART_7688 ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and a MT7688 (PCIe). +config BOARD_VOCORE2 + bool "VoCore2" + depends on SOC_MT7628 + select SUPPORTS_BOOT_RAM + help + Vonger VoCore2 board has a MT7628 SoC with 128 MiB of RAM + and 16 MiB of flash (SPI).
Is "Vonger" the name of the vendor / manufacturer of this board? I'm just checking - I don't really know.
endchoice choice @@ -134,5 +142,6 @@ config SUPPORTS_BOOT_RAM source "board/gardena/smart-gateway-mt7688/Kconfig" source "board/seeed/linkit-smart-7688/Kconfig" +source "board/vonger/vocore2/Kconfig" endmenu diff --git a/board/vonger/vocore2/Kconfig b/board/vonger/vocore2/Kconfig new file mode 100644 index 0000000000..4067973e70 --- /dev/null +++ b/board/vonger/vocore2/Kconfig @@ -0,0 +1,11 @@ +if BOARD_VOCORE2 +config SYS_BOARD + default "vocore2"
+config SYS_VENDOR + default "vonger"
+config SYS_CONFIG_NAME + default "vocore2"
+endif diff --git a/board/vonger/vocore2/Makefile b/board/vonger/vocore2/Makefile new file mode 100644 index 0000000000..4b162318c2 --- /dev/null +++ b/board/vonger/vocore2/Makefile @@ -0,0 +1,2 @@
+obj-y := board.o diff --git a/board/vonger/vocore2/board.c b/board/vonger/vocore2/board.c new file mode 100644 index 0000000000..1ab430247b --- /dev/null +++ b/board/vonger/vocore2/board.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2019 Mauro Condarelli mc5686@mclink.it
- Note: this is largely copied from:
- * board/seeed/linkit_smart_7688/board.c
- * Copyright (C) 2018 Stefan Roese sr@denx.de
- */
+#include <common.h> +#include <asm/io.h>
+#define MT76XX_GPIO1_MODE 0x10000060
+DECLARE_GLOBAL_DATA_PTR;
+void board_debug_uart_init(void) +{ + void __iomem *gpio_mode;
+ /* Select UART2 mode instead of GPIO mode (default) */ + gpio_mode = ioremap_nocache(MT76XX_GPIO1_MODE, 0x100); + clrbits_le32(gpio_mode, GENMASK(27, 26)); +}
+int board_early_init_f(void) +{ + /* + * The pin muxing of UART2 also needs to be done, if debug uart + * is not enabled. So we need to call this function here as well. + */ + board_debug_uart_init();
+ return 0; +} diff --git a/configs/vocore2_defconfig b/configs/vocore2_defconfig new file mode 100644 index 0000000000..7b09a16fa4 --- /dev/null +++ b/configs/vocore2_defconfig @@ -0,0 +1,61 @@ +CONFIG_MIPS=y +CONFIG_SYS_TEXT_BASE=0x80010000 +CONFIG_ENV_SIZE=0x00001000 +CONFIG_ENV_OFFSET=0x00FFE000 +CONFIG_ENV_SECT_SIZE=0x00001000 +CONFIG_ARCH_MTMIPS=y +CONFIG_BOARD_VOCORE2=y +CONFIG_MIPS_BOOT_FDT=y +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_SYS_BOOT_GET_CMDLINE=y +CONFIG_SYS_BOOT_GET_KBD=y +# CONFIG_LEGACY_IMAGE_FORMAT is not set +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_LOGLEVEL=8 +CONFIG_VERSION_VARIABLE=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +# CONFIG_AUTOBOOT is not set +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set
a lot of "is not set" entries. Did you generate this config with "make savedefconfig"?
+CONFIG_CMD_MTD=y +CONFIG_CMD_PART=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y
you should not enable features which the patch set don't support yet. I don't know about USB because you didn't mentioned it anywhere. But FAT or block devices are obviously left-overs from your MMC/SD experiments ;)
+CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=spi0.0" +CONFIG_MTDPARTS_DEFAULT="spi0.0:320k(u-boot),2752k(kernel),13304k(filesystem),4k(env),-(factory)"
+# CONFIG_ISO_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="vocore2" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_ADDR=0x00FFE000 +# CONFIG_NET is not set +# CONFIG_DM_DEVICE_REMOVE is not set +CONFIG_BLK=y +# CONFIG_INPUT is not set +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_MTD=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MTD=y +# CONFIG_DM_ETH is not set +# CONFIG_RAM_ROCKCHIP_DEBUG is not set +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_CONS_INDEX=3 +CONFIG_SPI=y +CONFIG_MT7621_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_STORAGE=y +CONFIG_LZMA=y +CONFIG_LZO=y diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h new file mode 100644 index 0000000000..9ee32329f2 --- /dev/null +++ b/include/configs/vocore2.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Copyright (C) 2019 Mauro Condarelli mc5686@mclink.it
- */
+#ifndef __VOCORE2_CONFIG_H__ +#define __VOCORE2_CONFIG_H__
+/* CPU */ +#define CONFIG_SYS_MIPS_TIMER_FREQ 290000000
+/* RAM */ +#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+#ifdef CONFIG_BOOT_RAM +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif
+/* UART */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200, 230400, 460800, 921600 } +#define CONFIG_BAUDRATE 115200
+/* RAM */ +#define CONFIG_SYS_MEMTEST_START 0x80100000 +#define CONFIG_SYS_MEMTEST_END 0x80400000
+/* Memory usage */ +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) +#define CONFIG_SYS_CBSIZE 512
+/* U-Boot */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+/* Environment settings */ +#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" +#endif
Is this needed here? Doesn't it work witout this in this header?
+/*
- Environment is right behind U-Boot in flash. Make sure U-Boot
- doesn't grow into the environment area.
- */
+//MCon: serve? #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
???
Please don't add dead code.
+#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +//#define CONFIG_ENV_OFFSET 0x0FFF000 +//#define CONFIG_ENV_SIZE 0x0001000
Same here, please don't add dead code.
+#endif//__VOCORE2_CONFIG_H__
Hmm, I'm pretty sure, that checkpatch will complain about this missing space here. Please run checkpatch over your patch(es) before submitting.
Thanks, Stefan