TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB
Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows for a payload of 3168 KB before env offset start to overlap.
Also add CONFIG_ROCKCHIP_SPI_IMAGE=y to build a bootable SPI flash image, u-boot-rockchip-spi.bin.
Signed-off-by: Jonas Karlman jonas@kwiboo.se --- arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 4 ---- configs/pinephone-pro-rk3399_defconfig | 4 +++- 2 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi index 347243fe4793..cabf0a9dae89 100644 --- a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi +++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi @@ -10,10 +10,6 @@ chosen { u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; }; - - config { - u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */ - }; };
&rng { diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig index e4a8beeb1abb..b09211f4eb6e 100644 --- a/configs/pinephone-pro-rk3399_defconfig +++ b/configs/pinephone-pro-rk3399_defconfig @@ -12,6 +12,7 @@ CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3399=y +CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_TARGET_PINEPHONE_PRO_RK3399=y CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFF1A0000 @@ -25,7 +26,7 @@ CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinephone-pro.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x400000 @@ -35,6 +36,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0xE0000 CONFIG_TPL=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y