Hi Marek,
From: Marek Vasut marex@denx.de Sent: jeudi 26 mars 2020 16:57
Define FMC2 base address, for use in board files, until there is an actual FMC2 bus driver.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrick Delaunay patrick.delaunay@st.com Cc: Patrice Chotard patrice.chotard@st.com
arch/arm/mach-stm32mp/include/mach/stm32.h | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach- stm32mp/include/mach/stm32.h index f0636005e5..62d95d7f88 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -13,6 +13,7 @@ #define STM32_RCC_BASE 0x50000000 #define STM32_PWR_BASE 0x50001000 #define STM32_DBGMCU_BASE 0x50081000 +#define STM32_FMC2_BASE 0x58002000
For me, the address should be defined in this file only for the few addresses used before device tree avaibility: I want to avoid to have all the device defined here.
But normally it is not the case for FMC2, even if I understand the current need, without FMC2 bus driver.... I will take this patch only it is not possible to get FMC2 address from device tree.
#define STM32_TZC_BASE 0x5C006000 #define STM32_ETZPC_BASE 0x5C007000
#define STM32_STGEN_BASE 0x5C008000
2.25.1
Regards
Patrick