Re: [U-Boot] [EXT] [PATCH v2 2/2] arm: ls1028a: use the new flexspi driver

Hi Michael,

-----Original Message----- From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Michael Walle Sent: Saturday, November 2, 2019 11:56 PM To: u-boot@lists.denx.de Subject: [EXT] [U-Boot] [PATCH v2 2/2] arm: ls1028a: use the new flexspi driver

Caution: EXT Email

Also align the fspi node with the kernel one. There is actually no driver which would match "nxp,dn-fspi".

Signed-off-by: Michael Walle michael@walle.cc

changes since v1:

• none

arch/arm/dts/fsl-ls1028a.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 43a154e8e7..774e477542 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -49,14 +49,16 @@ <1 10 0x8>; /* Hypervisor PPI, active-low */ };

•   fspi: flexspi@20C0000 {
  

•           compatible = "nxp,dn-fspi";
  

•   fspi: flexspi@20c0000 {
  

•           compatible = "nxp,lx2160a-fspi";
            #address-cells = <1>;
            #size-cells = <0>;
  

•           reg = <0x0 0x20C0000 0x0 0x10000>,
  

•                   <0x0 0x20000000 0x0 0x10000000>; /*64MB flash*/
  

•           reg-names = "FSPI", "FSPI-memory";
  

•           num-cs = <1>;
  

•           reg = <0x0 0x20c0000 0x0 0x10000>,
  

•                 <0x0 0x20000000 0x0 0x10000000>;
  

•           reg-names = "fspi_base", "fspi_mmap";
  

•           clocks = <&clockgen 4 3>, <&clockgen 4 3>;
  

•           clock-names = "fspi_en", "fspi";
  

•           interrupts = <0 25 0x4>;
  

Please change the interrupts to "<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>" as it avoids magic numbers.

Reviewed-by: Kuldeep Singh kuldeep.singh@nxp.com

            status = "disabled";
    };

-- 2.20.1