Add a following test cases for scsi commands: scsi_reset - To reset SCSI controller scsi_info - To show available SCSI devices scsi_scan - To (re-)scan SCSI bus scsi_device - To show or set surrent device scsi_part - To print partition table of selected SCSI device
Signed-off-by: Love Kumar love.kumar@amd.com --- test/py/tests/test_scsi.py | 92 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 test/py/tests/test_scsi.py
diff --git a/test/py/tests/test_scsi.py b/test/py/tests/test_scsi.py new file mode 100644 index 000000000000..be2e283e7d25 --- /dev/null +++ b/test/py/tests/test_scsi.py @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 +# (C) Copyright 2023, Advanced Micro Devices, Inc. + +import pytest + +""" +Note: This test relies on boardenv_* containing configuration values to define +the SCSI device number, type and capacity. This test will be automatically +skipped without this. + +For example: + +# Setup env__scsi_device_test to set the SCSI device number/slot, the type of +device, and the device capacity in MB. +env__scsi_device_test = { + 'dev_num': 0, + 'device_type': 'Hard Disk', + 'device_capacity': '476940.0 MB', +} +""" + +def scsi_setup(u_boot_console): + f = u_boot_console.config.env.get('env__scsi_device_test', None) + if not f: + pytest.skip('No SCSI device to test') + + dev_num = f.get('dev_num', None) + if not isinstance(dev_num, int): + pytest.skip('No device number specified in env file to read') + + dev_type = f.get('device_type') + if not dev_type: + pytest.skip('No device type specified in env file to read') + + dev_size = f.get('device_capacity') + if not dev_size: + pytest.skip('No device capacity specified in env file to read') + + return dev_num, dev_type, dev_size + +@pytest.mark.buildconfigspec('cmd_scsi') +def test_scsi_reset(u_boot_console): + dev_num, dev_type, dev_size = scsi_setup(u_boot_console) + output = u_boot_console.run_command('scsi reset') + assert f'Device {dev_num}:' in output + assert f'Type: {dev_type}' in output + assert f'Capacity: {dev_size}' in output + output = u_boot_console.run_command('echo $?') + assert output.endswith('0') + +@pytest.mark.buildconfigspec('cmd_scsi') +def test_scsi_info(u_boot_console): + dev_num, dev_type, dev_size = scsi_setup(u_boot_console) + output = u_boot_console.run_command('scsi info') + assert f'Device {dev_num}:' in output + assert f'Type: {dev_type}' in output + assert f'Capacity: {dev_size}' in output + output = u_boot_console.run_command('echo $?') + assert output.endswith('0') + +@pytest.mark.buildconfigspec('cmd_scsi') +def test_scsi_scan(u_boot_console): + dev_num, dev_type, dev_size = scsi_setup(u_boot_console) + output = u_boot_console.run_command('scsi scan') + assert f'Device {dev_num}:' in output + assert f'Type: {dev_type}' in output + assert f'Capacity: {dev_size}' in output + output = u_boot_console.run_command('echo $?') + assert output.endswith('0') + +@pytest.mark.buildconfigspec('cmd_scsi') +def test_scsi_dev(u_boot_console): + dev_num, dev_type, dev_size = scsi_setup(u_boot_console) + output = u_boot_console.run_command('scsi device') + assert 'no scsi devices available' not in output + assert f'device {dev_num}:' in output + assert f'Type: {dev_type}' in output + assert f'Capacity: {dev_size}' in output + output = u_boot_console.run_command('echo $?') + assert output.endswith('0') + output = u_boot_console.run_command('scsi device %d' % dev_num) + assert 'is now current device' in output + output = u_boot_console.run_command('echo $?') + assert output.endswith('0') + +@pytest.mark.buildconfigspec('cmd_scsi') +def test_scsi_part(u_boot_console): + test_scsi_dev(u_boot_console) + output = u_boot_console.run_command('scsi part') + assert 'Partition Map for SCSI device' in output + output = u_boot_console.run_command('echo $?') + assert output.endswith('0')