use "fsl_mc lazyapply dpl addr" instead of "fsl_mc apply dpl addr"
change dpl load addr to 0x80001000 from 0x80200000 because dpl gets corrupted at 0x80200000 during bootm command excecution.
Signed-off-by: Jagdish Gediya jagdish.gediya@nxp.com --- Changes for v2: - Change dpl load address from 0x80000000 to 0x80001000 as boot.scr is loaded at 0x80000000.
include/configs/ls1088a_common.h | 10 +++++----- include/configs/ls1088ardb.h | 12 ++++++------ 2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index ea48421..68da0b8 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -196,17 +196,17 @@ unsigned long long get_qixis_addr(void);
#if defined(CONFIG_QSPI_BOOT) #define CONFIG_BOOTCOMMAND "sf probe 0:0;" \ - "sf read 0x80200000 0xd00000 0x100000;"\ - " fsl_mc apply dpl 0x80200000 &&" \ + "sf read 0x80001000 0xd00000 0x100000;"\ + " fsl_mc lazyapply dpl 0x80001000 &&" \ " sf read $kernel_load $kernel_start" \ " $kernel_size && bootm $kernel_load" #elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80200000 0x6800 0x800;"\ - " fsl_mc apply dpl 0x80200000 &&" \ +#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\ + " fsl_mc lazyapply dpl 0x80001000 &&" \ " mmc read $kernel_load $kernel_start" \ " $kernel_size && bootm $kernel_load" #else /* NOR BOOT*/ -#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ +#define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \ " cp.b $kernel_start $kernel_load" \ " $kernel_size && bootm $kernel_load" #endif diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 4459994..d0ab2fa 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -381,8 +381,8 @@ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "env exists mcinitcmd && run mcinitcmd && " \ - "mmc read 0x80200000 0x6800 0x800;" \ - "fsl_mc apply dpl 0x80200000;" \ + "mmc read 0x80001000 0x6800 0x800;" \ + "fsl_mc lazyapply dpl 0x80001000;" \ "bootm $load_addr#ls1088ardb\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ @@ -402,11 +402,11 @@ #if defined(CONFIG_QSPI_BOOT) /* Try to boot an on-QSPI kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND \ - "sf read 0x80200000 0xd00000 0x100000;" \ + "sf read 0x80001000 0xd00000 0x100000;" \ "env exists mcinitcmd && env exists secureboot " \ " && sf read 0x80780000 0x780000 0x100000 " \ "&& esbc_validate 0x80780000;env exists mcinitcmd " \ - "&& fsl_mc apply dpl 0x80200000;" \ + "&& fsl_mc lazyapply dpl 0x80001000;" \ "run distro_bootcmd;run qspi_bootcmd;" \ "env exists secureboot && esbc_halt;"
@@ -414,11 +414,11 @@ #elif defined(CONFIG_SD_BOOT) #define CONFIG_BOOTCOMMAND \ "env exists mcinitcmd && mmcinfo; " \ - "mmc read 0x80200000 0x6800 0x800; " \ + "mmc read 0x80001000 0x6800 0x800; " \ "env exists mcinitcmd && env exists secureboot " \ " && mmc read 0x80780000 0x3800 0x10 " \ "&& esbc_validate 0x80780000;env exists mcinitcmd " \ - "&& fsl_mc apply dpl 0x80200000;" \ + "&& fsl_mc lazyapply dpl 0x80001000;" \ "run distro_bootcmd;run sd_bootcmd;" \ "env exists secureboot && esbc_halt;" #endif