From: Igor Opaniuk igor.opaniuk@toradex.com
Switch to the generic compressed Kernel image type (zImage) instead of the U-Boot specific uImage format.
Signed-off-by: Bhuvanchandra DV bhuvanchandra.dv@toradex.com Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com ---
include/configs/apalis-tk1.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 0bde1697bb..10f2948c62 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -42,7 +42,7 @@ #define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \ "boot part 0 1 mmcpart 0; " \ "rootfs part 0 2 mmcpart 0; " \ - "uImage fat 0 1 mmcpart 0; " \ + "zImage fat 0 1 mmcpart 0; " \ "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
#define EMMC_BOOTCMD \ @@ -54,7 +54,7 @@ "run emmcdtbload; " \ "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} - ${dtbparam}\0" \ + "bootz ${kernel_addr_r} - ${dtbparam}\0" \ "emmcbootpart=1\0" \ "emmcdev=0\0" \ "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ @@ -68,7 +68,7 @@ "nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \ "${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ "run nfsdtbload; dhcp ${kernel_addr_r} " \ - "&& run fdt_fixup && bootm ${kernel_addr_r} - ${dtbparam}\0" \ + "&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \ "${soc}-apalis-${fdt_board}.dtb " \ "&& setenv dtbparam ${fdt_addr_r}\0" @@ -81,7 +81,7 @@ "${vidargs}; echo Booting from SD card in 8bit slot...; " \ "run sddtbload; load mmc ${sddev}:${sdbootpart} " \ "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} - ${dtbparam}\0" \ + "bootz ${kernel_addr_r} - ${dtbparam}\0" \ "sdbootpart=1\0" \ "sddev=1\0" \ "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \ @@ -98,7 +98,7 @@ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ "run usbdtbload; load usb ${usbdev}:${usbbootpart} " \ "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} - ${dtbparam}\0" \ + "bootz ${kernel_addr_r} - ${dtbparam}\0" \ "usbbootpart=1\0" \ "usbdev=0\0" \ "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \ @@ -108,7 +108,7 @@ "usbrootpart=2\0"
#define BOARD_EXTRA_ENV_SETTINGS \ - "boot_file=uImage\0" \ + "boot_file=zImage\0" \ "console=ttyS0\0" \ "defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \ "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \