Hi,
this is the report of my problem. I have initialized the SOC FSL EHCI controller, and I typed usb start from u-boot console. I can see controller and mass storage, but mass storage doesn't seem to be correctly configurated. Can you explain to me what I must expect?
Thank you very much, Francesco.
EHCI SOC FSL: USB Init....Completed! Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0 USB_REQ_SET_ADDRESS Len is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0 USB_REQ_SET_CONFIGURATION Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF req=6 (0x6), type=128 (0x80), value=768, index=0 USB_DT_STRING config USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=769, index=1 USB_DT_STRING config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=770, index=1 USB_DT_STRING config Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=20, index=1 unknown feature 14 requesttype=23, request=1, value=14, index=1, length=0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x8 dev=1ffecc58, pipe=80000080, buffer=1ffecd5c, length=8, req=1ffeb1fc req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset
USB device not responding, giving up (status=80000000) usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=1, index=1 Len is 0 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
Michael Trimarchi-2 wrote:
Hi,
FrancescoVT wrote:
Hi,
I'm developing an USB EHCI driver for ADS5121e. Now , I completed initialization sequence for my SOC EHCI Controller. My scope is to use with mass storage, but I think that ehci core layer don't work correctly. Do somebody use EHCI CORE layer for Mass storage and it was ok?
Can you report exactly your problem? What happen?
Thank you.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot