On 20.02.2012 09:32, Marek Vasut wrote:
Marek, Stefano,
what kept you from accepting these patches? There was no objection on these.
The regs-digctl.h file being incomplete, it didn't contain all the bit definitions even though I shared the tool to convert file provided by FSL to uboot format.
Why must this file be absolute complete? It can be extended on need. This just slows down development and as you might have noticed, that it chases away some developers.
So accepting this patch is a first step. And hopefully the rest is added sometimes later. If not, well, then nobody needs it and there's no need to blow the headers.
Matthias
M
Matthias
On 07.02.2012 15:08, robert@delien.nl wrote:
From: Robert Delien robert@delien.nl
This patch eliminates the use of magic numbers for the scratch register addresses. The registers in the DIGCTL sections are now defined and used to access the scratch registers.
Robert Delien (2): Added register definitions for DIGCTL registers Replaced magic numbers for scratch register addresses with register
definitionsarch/arm/cpu/arm926ejs/mx28/mx28.c | 8 +- arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 8 +- arch/arm/include/asm/arch-mx28/imx-regs.h | 1 + arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 ++++++++++++++++++++++++++ 4 files changed, 164 insertions(+), 8 deletions(-) create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot