3 Jun
2004
3 Jun
'04
10:16 a.m.
In message 0c3501c448c4$4c72fa50$6b01a8c0@cc you wrote:
180 MHz ARM920T Core (AT91RM9200 microcontroller) 32 Mbyte SDRAM, 8Mbyte Flash ...
Other information here : http://www.unicoi.com/embedded_tools/csb337_atmelat91rm9200.htm
This board is not listed in the list of supported AT91RM9200 boards.
But the already supported card (Atmel's DK) is a good start. I used it for a custom board. Note however that in the current state you cannot boot directly on U-boot, you need a first level bootloader, like the one provided by Atmel.
JP Francois