Re: [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL

Simon,

On 26/05/20 10:24 pm, Simon Glass wrote:

Hi Faiz,

I have ended up with an omap L138 lcdk board. Do you have instructions on how to get it booting from uSD and how to create the card image? I have tried various sources but nothing works so far. Also, are you able to send me a test image I can 'dd' onto the board?

The commands in board/davinci/da8xxevm/README.da850 don't work?

Try the following:

2 - using the "dd" command $ dd if=u-boot.ais of=/dev/mmcblk0 seek=117 bs=512 conv=fsync

Thanks, Faiz