On 29.5.2018 16:33, Siva Durga Prasad Paladugu wrote:
This patch updates sdhci_send_command() to handle MMC HS200 tuning command.
Signed-off-by: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com
Changes from v1:
- Fixed spacings as per comment
drivers/mmc/sdhci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 400f87e..40e28ab 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -161,7 +161,8 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, /* We shouldn't wait for data inihibit for stop commands, even though they might use busy signaling */ if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION ||
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)mask &= ~SDHCI_DATA_INHIBIT;
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
@@ -183,7 +184,8 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
mask = SDHCI_INT_RESPONSE;
- if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)mask = SDHCI_INT_DATA_AVAIL;
if (!(cmd->resp_type & MMC_RSP_PRESENT))
@@ -201,7 +203,8 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, flags |= SDHCI_CMD_CRC; if (cmd->resp_type & MMC_RSP_OPCODE) flags |= SDHCI_CMD_INDEX;
- if (data || cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
if (data || cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)flags |= SDHCI_CMD_DATA;
/* Set Transfer mode regarding to data flag */
Applied.
Thanks, Michal