On Thu, 15 Aug 2019 03:35:28 +0000 Chuanhua Han chuanhua.han@nxp.com wrote:
-----Original Message----- From: Lukasz Majewski lukma@denx.de Sent: 2019年8月14日 19:39 To: Chuanhua Han chuanhua.han@nxp.com Cc: Jagan Teki jagan@amarulasolutions.com; Xiaowei Bao xiaowei.bao@nxp.com; U-Boot-Denx u-boot@lists.denx.de; Pan Jiafei Jiafei.Pan@freescale.com; Jagan Teki jagan@openedev.com; Ruchika Gupta ruchika.gupta@nxp.com Subject: Re: [U-Boot] [EXT] Re: [PATCH v4 1/5] spl: dm: disable SPI DM flash for non-DM SPL
On Wed, 14 Aug 2019 11:10:46 +0000 Chuanhua Han chuanhua.han@nxp.com wrote:
-----Original Message----- From: Lukasz Majewski lukma@denx.de Sent: 2019年8月14日 18:53 To: Chuanhua Han chuanhua.han@nxp.com Cc: Jagan Teki jagan@amarulasolutions.com; Xiaowei Bao xiaowei.bao@nxp.com; U-Boot-Denx u-boot@lists.denx.de; Pan Jiafei Jiafei.Pan@freescale.com; Jagan Teki jagan@openedev.com; Ruchika Gupta ruchika.gupta@nxp.com Subject: Re: [U-Boot] [EXT] Re: [PATCH v4 1/5] spl: dm: disable SPI DM flash for non-DM SPL
On Wed, 14 Aug 2019 10:41:32 +0000 Chuanhua Han chuanhua.han@nxp.com wrote:
-----Original Message----- From: Lukasz Majewski lukma@denx.de Sent: 2019年8月14日 16:57 To: Chuanhua Han chuanhua.han@nxp.com Cc: Jagan Teki jagan@amarulasolutions.com; Xiaowei Bao xiaowei.bao@nxp.com; U-Boot-Denx u-boot@lists.denx.de; Pan Jiafei Jiafei.Pan@freescale.com; Jagan Teki jagan@openedev.com; Ruchika Gupta ruchika.gupta@nxp.com Subject: Re: [U-Boot] [EXT] Re: [PATCH v4 1/5] spl: dm: disable SPI DM flash for non-DM SPL
Hi Chuanhua,
> > -----Original Message----- > > From: Jagan Teki jagan@amarulasolutions.com > > Sent: 2019年8月14日 15:45 > > To: Chuanhua Han chuanhua.han@nxp.com > > Cc: Wolfgang Denk wd@denx.de; Shengzhou Liu > > shengzhou.liu@nxp.com; Ruchika Gupta > > ruchika.gupta@nxp.com; Jagan Teki > > jagan@openedev.com; Simon Glass sjg@chromium.org; > > Prabhakar Kushwaha prabhakar.kushwaha@nxp.com; > > U-Boot-Denx u-boot@lists.denx.de; Pan Jiafei > > Jiafei.Pan@freescale.com Subject: [EXT] Re: [U-Boot] > > [PATCH v4 1/5] spl: dm: disable SPI DM flash for non-DM > > SPL > > > > Caution: EXT Email > > > > On Fri, Jun 21, 2019 at 7:51 AM Chuanhua Han > > chuanhua.han@nxp.com wrote: > > > > > > This patch solves the problem that spiboot cannot be > > > performed in non-DM SPL. > > > > > > Signed-off-by: Pan Jiafei Jiafei.Pan@freescale.com > > > Signed-off-by: Chuanhua Han chuanhua.han@nxp.com > > > --- > > > Changes in v4: > > > - No change. > > > Changes in v3: > > > - Add a cover-letter for this patch set. > > > Changes in v2: > > > - No change. > > > > > > include/config_uncmd_spl.h | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > diff --git a/include/config_uncmd_spl.h > > > b/include/config_uncmd_spl.h index > > > c2f9735ce7..da94b3d9df 100644 --- > > > a/include/config_uncmd_spl.h +++ > > > b/include/config_uncmd_spl.h @@ -15,6 +15,7 @@ > > > #undef CONFIG_DM_GPIO > > > #undef CONFIG_DM_I2C > > > #undef CONFIG_DM_SPI > > > +#undef CONFIG_DM_SPI_FLASH > > > > Have you made any Travis-CI run? > I tested it with a local board
Could you be so kind and also test following patchset (parts from Layerscape also needs testing): https://patchwork.ozlabs.org/cover/1146494/
I don't quite understand this patch. How can I test it?
You need to apply it first to -master branch.
Then apply your board code (or if it is already in mainline just remove the #undef(s) from include/config_uncmd_spl.h)
As a last step - run make menuconfig and enable SPL_DM_SPI* flags.
Currently, it is in the master, and SPI* in the #undef(s) from include/ uncmd_spl.h has been deleted, but an error was reported: CC spl/lib/display_options.o drivers/spi/spi.c: In function 'spi_do_alloc_slave': drivers/spi/spi.c:34:8: error: 'struct spi_slave' has no member named 'bus' slave->bus = bus; ^~ drivers/spi/spi.c:35:8: error: 'struct spi_slave' has no member named 'cs' slave->cs = cs; ^~ make[3]: *** [spl/drivers/spi/spi.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [spl/drivers/spi] Error 2 make[1]: *** [spl/drivers] Error 2 make[1]: *** Waiting for unfinished jobs.... LD spl/lib/built-in.o make: *** [spl/u-boot-spl] Error 2
If your board is in mainline (master branch) it shall build without issues:
Applied on top of -master branch: 'commit feb5a02f869d ("Merge branch 'master' of git://git.denx.de/u-boot-sh")' Travis-CI (clean build): https://travis-ci.org/lmajewski/u-boot-dfu/builds/570594278
The patch itself: https://patchwork.ozlabs.org/patch/1146377/
- I git reset to this commit: feb5a02f869d
- Your patch has been
Could you check if your board (the code which is now in mainline) compiles without issues at this step?
- Apply my
current patch set 4. Include/uncmd_uncmd_spl.h file is deleted as follows:
- # undef CONFIG_DM_SPI
- # undef CONFIG_DM_SPI_FLASH
- In include/configs/T208xQDS.h file:
+/* SPI Flash Configs */
- # if defined (CONFIG_SPL_BUILD)
- # undef CONFIG_DM_SPI
- # undef CONFIG_DM_SPI_FLASH
- # undef CONFIG_SPI_FLASH_MTD
- # endif
- Make menuconfig:
Configuration CONFIG_SPL_DM_SPI = y CONFIG_SPL_DM_SPI_FLASH = y 7. Compilation errors still occur: LD spl/lib/built-in.o LD spl/u-boot-spl drivers/built-in.o: In function `ofnode_read_u32': /home/hanch/uboot/uboot-upstream/u-boot/drivers/core/ofnode.c:29: undefined reference to `fdt_getprop' drivers/built-in.o: In function `ofnode_get_property': /home/hanch/uboot/uboot-upstream/u-boot/drivers/core/ofnode.c:528: undefined reference to `fdt_getprop' drivers/built-in.o: In function `blk_post_probe': /home/hanch/uboot/uboot-upstream/u-boot/drivers/block/blk-uclass.c:655: undefined reference to `part_init' drivers/built-in.o:(.u_boot_list_2_uclass_2_spi+0x8): undefined reference to `dm_scan_fdt_dev' make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2
Do I need to modify a lot of files?
Which allows removal of #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH
and have the same configuration done via Kconfig ?
> _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de