Hi Albin,
First of all thanks for the quick reply.
I tried out what you said about adding #define CONFIG_AT91_MCI1 to the board config file but although that did got rid of the mmc: command 1 failed (status: 0x0c100025) error it still doesn't see the SD card. After doing some debugging it seems like the statement:
if (aresp[0] & (R1_ILLEGAL_COMMAND | R1_APP_CMD)) != R1_APP_CMD) return -ENODEV;
in mmc_acmd() is being executed, which is causing my problem. Any suggestions?
Thanks, Henry
On Mon, Mar 15, 2010 at 4:10 PM, Albin Tonnerre < albin.tonnerre@free-electrons.com> wrote:
On Mon, 15 Mar 2010 15:51 -0400, Henry Súcart wrote :
Hi,
Hi Henry,
I've been trying to get an SD card working with an at91sam9g45ek-es
board. I
read a couple of threads in the archive and ended up doing this:
I applied these patches:
http://lists.denx.de/pipermail/u-boot/2009-August/059595.html http://lists.denx.de/pipermail/u-boot/2009-September/060053.html http://lists.denx.de/pipermail/u-boot/2009-September/060243.html
Added these #define's to include/configs/at91sam9m10g45ek.h:
#define CONFIG_CMD_EXT2 1 #define CONFIG_CMD_FAT 1 #define CONFIG_CMD_MMC 1 #define CONFIG_MMC 1 #define CONFIG_ATMEL_MCI 1
Finally, I added this to the board init function:
#ifdef CONFIG_ATMEL_MCI at91_mci0_hw_init(0, 4); #endif
When I try it out this is what I get: U-Boot> mmc init 0 mmc: clock 150000 too low; setting CLKDIV to 255 mmc: command 1 failed (status: 0x0c100025) No MMC card found
Am I doing something wrong? Any help is appreciated,
Maybe you're not. The at91sam9m10g45 has 2 MMC ports, and the atmel_mci driver only uses one, defined using MMCI_BASE. Now if you look at the end of the third patch:
diff --git a/include/asm-arm/arch-at91/memory-map.h b/include/asm-arm/arch-at91/memory-map.h index f605f37..de0aba7 100644 --- a/include/asm-arm/arch-at91/memory-map.h +++ b/include/asm-arm/arch-at91/memory-map.h @@ -32,4 +32,10 @@ #define USART3_BASE (AT91_BASE_SYS + AT91_DBGU) #define SPI0_BASE AT91_BASE_SPI
+#ifndef CONFIG_AT91_MCI1 +#define MMCI_BASE AT91_BASE_MCI0 +#else +#define MMCI_BASE AT91_BASE_MCI1 +#endif
So maybe the issue is that it's trying to read on the wrong port. Could you try to add #define CONFIG_AT91_MCI1 in your board config, recompile and see if that works better?
Thanks,
Albin Tonnerre, Free Electrons Kernel, drivers and embedded Linux development, consulting, training and support. http://free-electrons.com