When device-tree compilation fails it is sometimes tricky to see which line is broken, since the input file to dtc is a pre-processed version of the device tree.
Add a line that points to the file that needs to be checked:
When the error is in the main .dts file, output is something like this:
output: 'Error: arch/x86/dts/.chromebook_coral.dtb.pre.tmp:478.46-47 syntax error FATAL ERROR: Unable to parse input tree
but in fact looking at that file shows nothing useful:
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_157, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD)
Instead we need to look at the preprocessed file, which shows:
163 ((1U << 30) | (1 << 10)) ((0xb << 10) | PAD_CFG1_IOSSTATE_HIZCRX1)
Here it is clear that PAD_CFG1_IOSSTATE_HIZCRX1 is not defined and so is not being resolved by the preprocessor.
This commit adds an additional useful message:
Check arch/x86/dts/.chromebook_coral.dtb.dts.tmp for errors
Note that if the error is reported in an included file, such as u-boot.dtsi then the output is the following:
Error: arch/x86/dts/u-boot.dtsi:137.14-15 syntax error FATAL ERROR: Unable to parse input tree
But again, if the error is due to a preprocessor failure, like this:
filename = CONFIG_IFW_INPUT_FILE;
then you can't tell what the problem is by looking at the source. All you see is the original code:
intel-ifwi { filename = CONFIG_IFW_INPUT_FILE; ... }; }; intel-fsp-m { filename = CONFIG_FSP_FILE_M; };
Everything looks fine. But looking at the output of the preprocessor:
intel-ifwi { filename = CONFIG_IFW_INPUT_FILE; ... }; intel-fsp-m { filename = "fsp_m.bin"; };
This shows that the filename (normally "fitimage.bin") has not been inserted the preprocess, leading to the realisation that the value should be CONFIG_IFWI_INPUT_FILE.
If the above does not make sense, I encourage people to try introducing errors in the device tree preprocessed values.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v5: None Changes in v4: - One last desperate attempt to try to explain the purpose of this commit - Update the message to mention the preprocessed file, not un-preprocessed
Changes in v3: - Update example error message to better show the intended purpose
Changes in v2: None
scripts/Makefile.lib | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index ef116e0e0a..c10cd83a0a 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -300,7 +300,9 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \ $(DTC) -O dtb -o $@ -b 0 \ -i $(dir $<) $(DTC_FLAGS) \ - -d $(depfile).dtc.tmp $(dtc-tmp) ; \ + -d $(depfile).dtc.tmp $(dtc-tmp) || \ + (echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \ + ; \ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) ; \ sed -i "s:$(pre-tmp):$(<):" $(depfile)