Add SPI NOR support:
=> sf probe SF: Detected SST25VF032B with page size 256 Bytes, erase size 4 KiB, total 4 MiB
Signed-off-by: Otavio Salvador otavio@ossystems.com.br --- Changes since v1: - None
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 23 +++++++++++++++++++++++ include/configs/cgtqmx6eval.h | 10 ++++++++++ 2 files changed, 33 insertions(+)
diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c index 574891e..a9694d5 100644 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c @@ -45,6 +45,10 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+#define SPI_PAD_CTRL (PAD_CTL_HYS | \ + PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + #define MX6Q_QMX6_PFUZE_MUX IMX_GPIO_NR(6, 9)
@@ -152,6 +156,13 @@ static iomux_v3_cfg_t enet_pads_ar8035[] = { MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), };
+static iomux_v3_cfg_t const ecspi1_pads[] = { + MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) struct i2c_pads_info i2c_pad_info1 = { .scl = { @@ -382,6 +393,12 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); }
+void setup_spinor(void) +{ + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); + gpio_direction_output(IMX_GPIO_NR(3, 19), 0); +} + #ifdef CONFIG_FSL_ESDHC static struct fsl_esdhc_cfg usdhc_cfg[] = { {USDHC2_BASE_ADDR}, @@ -647,6 +664,7 @@ int board_early_init_f(void) { setup_iomux_uart(); setup_display(); + setup_spinor();
return 0; } @@ -672,6 +690,11 @@ int checkboard(void) return 0; }
+int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -EINVAL; +} + #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 92930c8..d0d098a 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -29,6 +29,16 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0
+/* SPI NOR */ +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + /* Miscellaneous commands */ #define CONFIG_CMD_BMODE