Hi Stefano,
I downloaded the patch about Falcon Mode from:
https://www.amazon.com/clouddrive/share/hVlzRXoJv1Jq4DJdgDcVnfmOWjARqR06eCfh...
Then, as the README file says I did a checkout on commit 587c3f8ebe356b558f1876414885c1b4a31294ab and applied the patch.
$ git am 0001-wandboard-changes-for-EW-2016-demo.patch
I compiled without errors and then I've tried to upload to the SD card, by doing:
$ sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync
$ sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=69; sync
But, everytime I try to turn on the board I got this error:
U-Boot 2016.01-rc4-26067-g0ff7f76 (Aug 08 2016 - 09:41:44 -0300)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR initcall sequence 178290cc failed at call 178038bd (err=394279101) ### ERROR ### Please RESET the board ###
I'm using wanboard quad rev: B1.
Does anybody know how to solve this?
Regards, Diego Dorta