Subject: [PATCH v2 6/6] mx7ulp: Add support for Embedded Artists COM board
Hi Fabio,
Seems you not add dts files. CI build fail arm: + mx7ulp_com +make[3]: *** No rule to make target 'arch/arm/dts/imx7ulp-com.dtb', needed by 'dtbs'. Stop. +make[2]: *** [arch-dtbs] Error 2 +make[1]: *** [dts/dt.dtb] Error 2 +make: *** [sub-make] Error 2
Thanks, Peng.
The Embedded Artists COM board is based on NXP i.MX7ULP.
It has a BD70528 PMIC from Rohm with discrete DCDC powering option and improved current observability (compared to the existing NXP i.MX7ULP EVK).
Add the initial support for the board.
Signed-off-by: Fabio Estevam festevam@gmail.com
Changes since v1:
- Lower the DDR frequency inside DCD as it is safer (Ye Li)
- Drop CONFIG_IMX7ULP_LOWER_DDR_FREQUENCY=y
arch/arm/dts/Makefile | 3 +- arch/arm/mach-imx/mx7ulp/Kconfig | 6 ++ board/ea/mx7ulp_com/Kconfig | 12 +++ board/ea/mx7ulp_com/MAINTAINERS | 6 ++ board/ea/mx7ulp_com/Makefile | 6 ++ board/ea/mx7ulp_com/imximage.cfg | 137 +++++++++++++++++++++++++++++++ board/ea/mx7ulp_com/mx7ulp_com.c | 48 +++++++++++ configs/mx7ulp_com_defconfig | 58 +++++++++++++ include/configs/mx7ulp_com.h | 107 ++++++++++++++++++++++++ 9 files changed, 382 insertions(+), 1 deletion(-) create mode 100644 board/ea/mx7ulp_com/Kconfig create mode 100644 board/ea/mx7ulp_com/MAINTAINERS create mode 100644 board/ea/mx7ulp_com/Makefile create mode 100644 board/ea/mx7ulp_com/imximage.cfg create mode 100644 board/ea/mx7ulp_com/mx7ulp_com.c create mode 100644 configs/mx7ulp_com_defconfig create mode 100644 include/configs/mx7ulp_com.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6a7dbb6309..c5c29dbcd0 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -645,7 +645,8 @@ dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ imx7d-pico-hobbit.dtb
-dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb +dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \
- imx7ulp-evk.dtb
dtb-$(CONFIG_ARCH_IMX8) += \ fsl-imx8qm-apalis.dtb \ diff --git a/arch/arm/mach-imx/mx7ulp/Kconfig b/arch/arm/mach-imx/mx7ulp/Kconfig index 138c58363f..6680f856c5 100644 --- a/arch/arm/mach-imx/mx7ulp/Kconfig +++ b/arch/arm/mach-imx/mx7ulp/Kconfig @@ -15,6 +15,11 @@ choice prompt "MX7ULP board select" optional
+config TARGET_MX7ULP_COM
- bool "Support MX7ULP COM board"
- select MX7ULP
- select SYS_ARCH_TIMER
config TARGET_MX7ULP_EVK bool "Support mx7ulp EVK board" select MX7ULP @@ -22,6 +27,7 @@ config TARGET_MX7ULP_EVK
endchoice
+source "board/ea/mx7ulp_com/Kconfig" source "board/freescale/mx7ulp_evk/Kconfig"
endif diff --git a/board/ea/mx7ulp_com/Kconfig b/board/ea/mx7ulp_com/Kconfig new file mode 100644 index 0000000000..90883aced4 --- /dev/null +++ b/board/ea/mx7ulp_com/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MX7ULP_COM
+config SYS_BOARD
- default "mx7ulp_com"
+config SYS_VENDOR
- default "ea"
+config SYS_CONFIG_NAME
- default "mx7ulp_com"
+endif diff --git a/board/ea/mx7ulp_com/MAINTAINERS b/board/ea/mx7ulp_com/MAINTAINERS new file mode 100644 index 0000000000..3f69511b1a --- /dev/null +++ b/board/ea/mx7ulp_com/MAINTAINERS @@ -0,0 +1,6 @@ +MX7ULPCOM BOARD +M: Fabio Estevam festevam@gmail.com +S: Maintained +F: board/ea/mx7ulp_com/ +F: include/configs/mx7ulp_com.h +F: configs/mx7ulp_com_defconfig diff --git a/board/ea/mx7ulp_com/Makefile b/board/ea/mx7ulp_com/Makefile new file mode 100644 index 0000000000..b3b230b172 --- /dev/null +++ b/board/ea/mx7ulp_com/Makefile @@ -0,0 +1,6 @@ +# (C) Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +#
+obj-y := mx7ulp_com.o diff --git a/board/ea/mx7ulp_com/imximage.cfg b/board/ea/mx7ulp_com/imximage.cfg new file mode 100644 index 0000000000..e405d758b5 --- /dev/null +++ b/board/ea/mx7ulp_com/imximage.cfg @@ -0,0 +1,137 @@ +/*
- Copyright (C) 2016 Freescale Semiconductor, Inc.
- SPDX-License-Identifier: GPL-2.0+
- Refer docs/README.imxmage for more details about how-to configure
- and create imximage boot image
- The syntax is taken as close as possible with the kwbimage */
+#define __ASSEMBLY__ +#include <config.h>
+/* image version */
+IMAGE_VERSION 2
+/*
- Boot Device : one of
- spi/sd/nand/onenand, qspi/nor
- */
+BOOT_FROM sd
+#ifdef CONFIG_USE_IMXIMG_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/freescale/mx7ulp_evk/plugin.bin 0x2F020000 +#else
+#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif +/*
- Device Configuration Data (DCD)
- Each entry must have the format:
- Addr-type Address Value
- where:
- Addr-type register length (1,2 or 4 bytes)
- Address absolute address of the register
- value value to be stored in the register
- */
+DATA 4 0x403f00dc 0x00000000 +DATA 4 0x403e0040 0x01000020 +DATA 4 0x403e0500 0x01000000 +DATA 4 0x403e050c 0x80808080 +DATA 4 0x403e0508 0x00160002 +DATA 4 0x403E0510 0x00000001 +DATA 4 0x403E0514 0x00000014 +DATA 4 0x403e0500 0x00000001 +CHECK_BITS_SET 4 0x403e0500 0x01000000 +/*
- Default PFD0 divide is 27, which generates:
- PFD0 Freq = A7 APLL(528MHz) * 18 / 27 = 352MHz
- i.MX7ULP COM board can not run DDR at 352MHz, so
- use a divider of 30 (0x1E), which gives:
- PFD0 Freq = A7 APLL(528MHz) * 18 / 30 = 316.8MHz */
+DATA 4 0x403e050c 0x8080801E +CHECK_BITS_SET 4 0x403e050c 0x00000040 +DATA 4 0x403E0030 0x00000001 +DATA 4 0x403e0040 0x11000020 +DATA 4 0x403f00dc 0x42000000
+DATA 4 0x40B300AC 0x40000000
+DATA 4 0x40AD0128 0x00040000 +DATA 4 0x40AD00F8 0x00000000 +DATA 4 0x40AD00D8 0x00000180 +DATA 4 0x40AD0104 0x00000180 +DATA 4 0x40AD0108 0x00000180 +DATA 4 0x40AD0124 0x00010000 +DATA 4 0x40AD0080 0x0000018C +DATA 4 0x40AD0084 0x0000018C +DATA 4 0x40AD0088 0x0000018C +DATA 4 0x40AD008C 0x0000018C
+DATA 4 0x40AD0120 0x00010000 +DATA 4 0x40AD010C 0x00000180 +DATA 4 0x40AD0110 0x00000180 +DATA 4 0x40AD0114 0x00000180 +DATA 4 0x40AD0118 0x00000180 +DATA 4 0x40AD0090 0x00000180 +DATA 4 0x40AD0094 0x00000180 +DATA 4 0x40AD0098 0x00000180 +DATA 4 0x40AD009C 0x00000180
+DATA 4 0x40AD00E0 0x00040000 +DATA 4 0x40AD00E4 0x00040000
+DATA 4 0x40AB001C 0x00008000 +DATA 4 0x40AB085C 0x0D3900A0 +DATA 4 0x40AB0800 0xA1390003 +DATA 4 0x40AB0890 0x00400000 +DATA 4 0x40AB081C 0x33333333 +DATA 4 0x40AB0820 0x33333333 +DATA 4 0x40AB0824 0x33333333 +DATA 4 0x40AB0828 0x33333333 +DATA 4 0x40AB08C0 0x24922492 +DATA 4 0x40AB0848 0x3A3E3838 +DATA 4 0x40AB0850 0x28282C2A +DATA 4 0x40AB083C 0x20000000 +DATA 4 0x40AB0840 0x00000000 +DATA 4 0x40AB08B8 0x00000800 +DATA 4 0x40AB000C 0x292C40F5 +DATA 4 0x40AB0004 0x00020064 +DATA 4 0x40AB0010 0xB6AD0A83 +DATA 4 0x40AB0014 0x00C70093 +DATA 4 0x40AB0018 0x00211708 +DATA 4 0x40AB002C 0x0F9F26D2 +DATA 4 0x40AB0030 0x009F0E10 +DATA 4 0x40AB0038 0x00130556 +DATA 4 0x40AB0008 0x12272000 +DATA 4 0x40AB0040 0x0000003F +DATA 4 0x40AB0000 0xC3110000 +DATA 4 0x40AB001C 0x00008010 +DATA 4 0x40AB001C 0x00008018 +DATA 4 0x40AB001C 0x003F8030 +DATA 4 0x40AB001C 0xFF0A8030 +DATA 4 0x40AB001C 0x82018030 +DATA 4 0x40AB001C 0x06028030 +DATA 4 0x40AB001C 0x01038030 +DATA 4 0x40AB001C 0x003F8038 +DATA 4 0x40AB001C 0xFF0A8038 +DATA 4 0x40AB001C 0x82018038 +DATA 4 0x40AB001C 0x06028038 +DATA 4 0x40AB001C 0x01038038 +DATA 4 0x40AB083C 0xA0000000 +DATA 4 0x40AB083C 0xA0000000 +DATA 4 0x40AB0020 0x00001800 +DATA 4 0x40AB0800 0xA1310003 +DATA 4 0x40AB001C 0x00000000 +#endif diff --git a/board/ea/mx7ulp_com/mx7ulp_com.c b/board/ea/mx7ulp_com/mx7ulp_com.c new file mode 100644 index 0000000000..6fc1631bf7 --- /dev/null +++ b/board/ea/mx7ulp_com/mx7ulp_com.c @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2016 Freescale Semiconductor, Inc.
- */
+#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mx7ulp-pins.h> +#include <asm/arch/iomux.h> +#include <asm/gpio.h>
+DECLARE_GLOBAL_DATA_PTR;
+#define UART_PAD_CTRL (PAD_CTL_PUS_UP)
+int dram_init(void) +{
- gd->ram_size = imx_ddr_size();
- return 0;
+}
+static iomux_cfg_t const lpuart4_pads[] = {
- MX7ULP_PAD_PTC3__LPUART4_RX |
MUX_PAD_CTRL(UART_PAD_CTRL),
- MX7ULP_PAD_PTC2__LPUART4_TX |
MUX_PAD_CTRL(UART_PAD_CTRL), };
+static void setup_iomux_uart(void) +{
- mx7ulp_iomux_setup_multiple_pads(lpuart4_pads,
ARRAY_SIZE(lpuart4_pads));+}
+int board_early_init_f(void) +{
- setup_iomux_uart();
- return 0;
+}
+int board_init(void) +{
- /* address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- return 0;
+} diff --git a/configs/mx7ulp_com_defconfig b/configs/mx7ulp_com_defconfig new file mode 100644 index 0000000000..44cae16fc8 --- /dev/null +++ b/configs/mx7ulp_com_defconfig @@ -0,0 +1,58 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7ULP=y +CONFIG_SYS_TEXT_BASE=0x67800000 +CONFIG_LDO_ENABLED_MODE=y +CONFIG_TARGET_MX7ULP_COM=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ea/mx7ulp_com/imxi mage.cfg" +CONFIG_DEFAULT_FDT_FILE="imx7ulp-com" +CONFIG_BOUNCE_BUFFER=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-com" +CONFIG_ENV_IS_IN_MMC=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_IMX_RGPIO2P=y +# CONFIG_MXC_GPIO is not set +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_DM_MMC=y +CONFIG_FSL_USDHC=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=40000000 +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX7ULP=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_ULP_WATCHDOG=y diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h new file mode 100644 index 0000000000..ba32afde38 --- /dev/null +++ b/include/configs/mx7ulp_com.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Copyright (C) 2016 Freescale Semiconductor, Inc.
- Configuration settings for the Embedded Artists i.MX7ULP COM board.
- */
+#ifndef __MX7ULP_COM_CONFIG_H +#define __MX7ULP_COM_CONFIG_H
+#include <linux/sizes.h> +#include <asm/arch/imx-regs.h>
+#define CONFIG_BOARD_POSTCLK_INIT +#define CONFIG_SYS_BOOTM_LEN 0x1000000
+#define SRC_BASE_ADDR CMC1_RBASE +#define IRAM_BASE_ADDR OCRAM_0_BASE +#define IOMUXC_BASE_ADDR IOMUXC1_RBASE
+/* Environment starts at 768k = 768 * 1024 = 786432 */ +#define CONFIG_ENV_OFFSET 786432 +/*
- Detect overlap between U-Boot image and environment area in
+build-time
- CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot-dtb.imx
offset
- CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
- Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- write the direct value here
- */
+#define CONFIG_BOARD_SIZE_LIMIT 785408 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_MMCROOT "/dev/mmcblk0p2" +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+#define CONFIG_ENV_SIZE SZ_8K
+/* Using ULP WDOG for reset */ +#define WDOG_BASE_ADDR WDG1_RBASE
+#define CONFIG_SYS_HZ_CLOCK 1000000 /* Fixed at 1MHz from TSTMR */
+#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS
+/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M)
+/* UART */ +#define LPUART_BASE LPUART4_RBASE
+/* allow to overwrite serial and ethaddr */ #define +CONFIG_ENV_OVERWRITE
+/* Physical Memory Map */
+#define PHYS_SDRAM 0x60000000 +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_LOADADDR 0x60800000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)
+#define CONFIG_EXTRA_ENV_SETTINGS \
- "image=zImage\0" \
- "console=ttyLP0\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_file=imx7ulp-com.dtb\0" \
- "fdt_addr=0x63000000\0" \
- "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
- "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0"
\
- "mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \"if run loadfdt; then " \"bootz ${loadaddr} - ${fdt_addr}; " \"fi;\0" \+#define CONFIG_BOOTCOMMAND \
- "if run loadimage; then " \
"run mmcboot; " \- "fi; " \
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE SZ_256K
+#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define
+CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) +#define CONFIG_CMD_CACHE +#endif
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#endif /* __CONFIG_H */
2.17.1