buswidth isn't used anywhere in sdhci_setup_cfg.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com Reviewed-by: Minkyu Kang mk7.kang@samsung.com Reviewed-by: Simon Glass sjg@chromium.org --- Changes for V2: - None
drivers/mmc/msm_sdhci.c | 4 ++-- drivers/mmc/sdhci.c | 4 ++-- drivers/mmc/zynq_sdhci.c | 2 +- include/sdhci.h | 3 +-- 4 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c index 70a8d96..e90a044 100644 --- a/drivers/mmc/msm_sdhci.c +++ b/drivers/mmc/msm_sdhci.c @@ -144,8 +144,8 @@ static int msm_sdc_probe(struct udevice *dev) host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
caps = sdhci_readl(host, SDHCI_CAPABILITIES); - ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width, - caps, 0, 0, host->version, host->quirks, 0); + ret = sdhci_setup_cfg(&plat->cfg, dev->name, caps, + 0, 0, host->version, host->quirks, 0); host->mmc = &plat->mmc; if (ret) return ret; diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 4112223..c275314 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -511,7 +511,7 @@ static const struct mmc_ops sdhci_ops = { }; #endif
-int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, +int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, uint caps, u32 max_clk, u32 min_clk, uint version, uint quirks, uint host_caps) { @@ -582,7 +582,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) } #endif
- if (sdhci_setup_cfg(&host->cfg, host->name, host->bus_width, caps, + if (sdhci_setup_cfg(&host->cfg, host->name, caps, max_clk, min_clk, SDHCI_GET_VERSION(host), host->quirks, host->host_caps)) { printf("%s: Hardware doesn't specify base clock frequency\n", diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index bcd154a..69d6151 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -40,7 +40,7 @@ static int arasan_sdhci_probe(struct udevice *dev) host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
caps = sdhci_readl(host, SDHCI_CAPABILITIES); - ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width, + ret = sdhci_setup_cfg(&plat->cfg, dev->name, caps, CONFIG_ZYNQ_SDHCI_MAX_FREQ, CONFIG_ZYNQ_SDHCI_MIN_FREQ, host->version, host->quirks, 0); diff --git a/include/sdhci.h b/include/sdhci.h index c4d3b55..693ecc1 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -368,7 +368,6 @@ static inline u8 sdhci_readb(struct sdhci_host *host, int reg) * * @cfg: Configuration structure to fill in (generally &plat->mmc) * @name: Device name (normally dev->name) - * @buswidth: Bus width (in bits, such as 4 or 8) * @caps: Host capabilities (MMC_MODE_...) * @max_clk: Maximum supported clock speed in HZ (0 for default) * @min_clk: Minimum supported clock speed in HZ (0 for default) @@ -377,7 +376,7 @@ static inline u8 sdhci_readb(struct sdhci_host *host, int reg) * @quirks: Quick flags (SDHCI_QUIRK_...) * @host_caps: Additional host capabilities (0 if none) */ -int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, +int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, uint caps, u32 max_clk, u32 min_clk, uint version, uint quirks, uint host_caps);