In SPL framework, SPL uses u-boot.img to load u-boot.bin. Here, u-boot.img = uImage header + u-boot.bin
To use OF control with a separate devicetree, u-boot.dtb must be placed right after u-boot.bin. In this case, u-boot-dtb.bin is generally used. Here, u-boot-dtb.bin = u-boot.bin + u-boot.dtb
We need u-boot-dtb.img to use both SPL framework and separate OF control at the same time. u-boot-dtb.img = uImage header + u-boot-dtb.bin
For example, Zynq boards already define all of - CONFIG_SPL - CONFIG_OF_CONTROL - CONFIG_OF_SEPARATE
So, the support of u-boot-dtb.img is urgent.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Michal Simek michal.simek@xilinx.com Cc: Simon Glass sjg@chromium.org ---
Makefile | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Makefile b/Makefile index e82f616..83d1cc6 100644 --- a/Makefile +++ b/Makefile @@ -752,6 +752,9 @@ ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin +ifeq ($(CONFIG_SPL_FRAMEWORK),y) +ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img +endif ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb ifneq ($(CONFIG_SPL_TARGET),) ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) @@ -854,6 +857,11 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE $(call if_changed,mkimage)
+MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) + +u-boot-dtb.img: u-boot-dtb.bin FORCE + $(call if_changed,mkimage) + u-boot.sha1: u-boot.bin tools/ubsha1 u-boot.bin