On Mon, Jan 27, 2020 at 6:59 AM André Przywara andre.przywara@arm.com wrote:
On 21/01/2020 08:20, Jagan Teki wrote:
Hi Jagan,
first: many thanks for merging those other patches of mine, much appreciated!
On Mon, Jan 6, 2020 at 6:59 AM Andre Przywara andre.przywara@arm.com wrote:
So far we were using the CONFIG_SUNXI_GEN_SUN6I symbol to select between the two SPI controller generations used on Allwinner SoCs. This is a convenience symbol to roughly differentiate between "older" and "newer" generation of SoCs.
The H6 SoCs is the newest SoC so far, but is sufficiently different to not define this symbol. However it is using a SPI controller compatible to the "new gen" SoCs.
To prepare for H6 support, we replace the check for this single symbol with an explicit function, which can later be extended. For now we just return CONFIG_SUNXI_GEN_SUN6I in there, so this does not create a functional change.
Signed-off-by: Andre Przywara andre.przywara@arm.com
arch/arm/mach-sunxi/spl_spi_sunxi.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c index 5b4598a25b..b19f1bf4af 100644 --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c @@ -100,9 +100,14 @@ static void spi0_pinmux_setup(unsigned int pin_function) sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function); }
+static bool is_new_gen_spi(void) +{
return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I);+}
Doesn't it confusing? new gen is H6, but it returns 6I?
Well, naming ... For the purpose of U-Boot there are two generations of SPI controller *register interfaces*, the "old" one used in the older SoCs like the A20, and the "newer" one used in everything halfway recent. The H6 uses the same "new" generation, just at a different address. Yes, it adds quad-SPI, but this is not relevant for this driver. I have seen this old/new terminology at different places, so just went with it. I could rename it to is_spi_sun6i_gen() or something if that makes you happy...
Please do, would be great if you can send the new changes as soon as possible so-that I can send PR for the rc1.
Jagan.