12 May
2020
12 May
'20
6:43 p.m.
On Mon, Mar 30, 2020 at 9:15 PM Pratyush Yadav p.yadav@ti.com wrote:
Hi,
This series adds support for octal DTR flashes in the spi-nor framework, and then adds hooks for the Cypress Semper flash which is an xSPI compliant Octal DTR flash.
The Cadence QSPI controller driver is also updated to run in Octal DTR mode.
Tested on TI J721e EVM with 1-bit ECC on the Cypress flash on top of u-boot-ti/next.
This series depends on [0].
[0] cf. 20200224071051.19331-1-p.yadav@ti.com [0] https://lists.denx.de/pipermail/u-boot/2020-February/401192.html
Changes in v3:
- Read 2 bytes in Octal DTR mode when reading SR and FSR to avoid tripping up controllers.
- Use op->data.nbytes as a measure of whether the data phase exists or not. This fixes data buswidth not being updadted for SR and FSR reads because they keep data buffer as NULL when calling spi_nor_setup_op().
- Add support for Micron mt35xu512aba to run in Octal DTR mode.
Do you have foot-print statistics for these changes? if yes can mark it here.
Jagan.