The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS) subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within the MCU domain, and the remaining two clusters are present in the MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be configured at boot time to be either run in a LockStep mode or in an Asymmetric Multi Processing (AMP) fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal memories for each core split between two banks - ATCM and BTCM (further interleaved into two banks). There are some IP integration differences from standard Arm R5 clusters such as the absence of an ACP port, presence of an additional TI-specific Region Address Translater (RAT) module for translating 32-bit CPU addresses into larger system bus addresses etc.
Add the DT nodes for these two MAIN domain R5F cluster/subsystems, the two R5 cores are each added as child nodes to the corresponding main cluster node. Configure SS0 in split mode an SS1 in lockstep mode, with the ATCMs enabled to allow the R5 cores to execute code from DDR with boot-strapping code from ATCM.
Signed-off-by: Suman Anna s-anna@ti.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- arch/arm/dts/k3-j721e-common-proc-board.dts | 4 ++ arch/arm/dts/k3-j721e-main.dtsi | 76 +++++++++++++++++++++ 2 files changed, 80 insertions(+)
diff --git a/arch/arm/dts/k3-j721e-common-proc-board.dts b/arch/arm/dts/k3-j721e-common-proc-board.dts index 070d21cd05..21afdc8ce0 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-common-proc-board.dts @@ -16,6 +16,10 @@ aliases { remoteproc0 = &mcu_r5fss0_core0; remoteproc1 = &mcu_r5fss0_core1; + remoteproc2 = &main_r5fss0_core0; + remoteproc3 = &main_r5fss0_core1; + remoteproc4 = &main_r5fss1_core0; + remoteproc5 = &main_r5fss1_core1; }; };
diff --git a/arch/arm/dts/k3-j721e-main.dtsi b/arch/arm/dts/k3-j721e-main.dtsi index 3445784293..59ca4e5686 100644 --- a/arch/arm/dts/k3-j721e-main.dtsi +++ b/arch/arm/dts/k3-j721e-main.dtsi @@ -228,4 +228,80 @@ ti,trm-icp = <0x8>; dma-coherent; }; + + main_r5fss0: r5fss@5c00000 { + compatible = "ti,j721e-r5fss"; + lockstep-mode = <0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c00000 0x00 0x5c00000 0x20000>, + <0x5d00000 0x00 0x5d00000 0x20000>; + power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@5c00000 { + compatible = "ti,j721e-r5f"; + reg = <0x5c00000 0x00008000>, + <0x5c10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <245>; + ti,sci-proc-ids = <0x06 0xFF>; + resets = <&k3_reset 245 1>; + atcm-enable = <1>; + btcm-enable = <1>; + loczrama = <1>; + }; + + main_r5fss0_core1: r5f@5d00000 { + compatible = "ti,j721e-r5f"; + reg = <0x5d00000 0x00008000>, + <0x5d10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <246>; + ti,sci-proc-ids = <0x07 0xFF>; + resets = <&k3_reset 246 1>; + atcm-enable = <1>; + btcm-enable = <1>; + loczrama = <1>; + }; + }; + + main_r5fss1: r5fss@5e00000 { + compatible = "ti,j721e-r5fss"; + lockstep-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5e00000 0x00 0x5e00000 0x20000>, + <0x5f00000 0x00 0x5f00000 0x20000>; + power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss1_core0: r5f@5e00000 { + compatible = "ti,j721e-r5f"; + reg = <0x5e00000 0x00008000>, + <0x5e10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <247>; + ti,sci-proc-ids = <0x08 0xFF>; + resets = <&k3_reset 247 1>; + atcm-enable = <1>; + btcm-enable = <1>; + loczrama = <1>; + }; + + main_r5fss1_core1: r5f@5f00000 { + compatible = "ti,j721e-r5f"; + reg = <0x5f00000 0x00008000>, + <0x5f10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <248>; + ti,sci-proc-ids = <0x09 0xFF>; + resets = <&k3_reset 248 1>; + atcm-enable = <1>; + btcm-enable = <1>; + loczrama = <1>; + }; + }; };