From: Peng Fan peng.fan@nxp.com
These files should not be in U-Boot repo
Signed-off-by: Peng Fan peng.fan@nxp.com --- board/freescale/imx8mm_evk/boot.cmd | 35 ----------------------------- board/freescale/imx8mp_evk/boot.cmd | 25 --------------------- 2 files changed, 60 deletions(-) delete mode 100644 board/freescale/imx8mm_evk/boot.cmd delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
diff --git a/board/freescale/imx8mm_evk/boot.cmd b/board/freescale/imx8mm_evk/boot.cmd deleted file mode 100644 index fdfceec263..0000000000 --- a/board/freescale/imx8mm_evk/boot.cmd +++ /dev/null @@ -1,35 +0,0 @@ -setenv bootargs console=${console} root=${mmcroot}; - -for boot_target in ${boot_targets}; -do - if test "${boot_target}" = "mmc1" ; then - if fatload mmc 1:${mmcpart} ${kernel_addr_r} ${image}; then - if fatload mmc 1:${mmcpart} ${fdt_addr} ${fdt_file}; then - echo Load image and .dtb from SD card(mmc1); - booti ${kernel_addr_r} - ${fdt_addr}; - exit; - fi - fi - fi - - if test "${boot_target}" = "mmc2" ; then - if fatload mmc 2:${mmcpart} ${kernel_addr_r} ${image}; then - if fatload mmc 2:${mmcpart} ${fdt_addr} ${fdt_file}; then - echo Load image and .dtb from eMMC(mmc2); - booti ${kernel_addr_r} - ${fdt_addr}; - exit; - fi - fi - fi - - if test "${boot_target}" = "dhcp" ; then - if dhcp ${kernel_addr_r} ${serverip}:${image}; then - if dhcp ${fdt_addr} ${serverip}:${fdt_file}; then - echo Load image and .dtb from net(dhcp); - booti ${kernel_addr_r} - ${fdt_addr}; - exit; - fi - fi - fi - -done diff --git a/board/freescale/imx8mp_evk/boot.cmd b/board/freescale/imx8mp_evk/boot.cmd deleted file mode 100644 index 10bcced774..0000000000 --- a/board/freescale/imx8mp_evk/boot.cmd +++ /dev/null @@ -1,25 +0,0 @@ -setenv bootargs console=${console} root=${mmcroot}; - -for boot_target in ${boot_targets}; -do - if test "${boot_target}" = "mmc1" ; then - if fatload mmc 1:${mmcpart} ${kernel_addr_r} ${image}; then - if fatload mmc 1:${mmcpart} ${fdt_addr} ${fdt_file}; then - echo Load image and .dtb from SD card(mmc1); - booti ${kernel_addr_r} - ${fdt_addr}; - exit; - fi - fi - fi - - if test "${boot_target}" = "mmc2" ; then - if fatload mmc 2:${mmcpart} ${kernel_addr_r} ${image}; then - if fatload mmc 2:${mmcpart} ${fdt_addr} ${fdt_file}; then - echo Load image and .dtb from eMMC(mmc2); - booti ${kernel_addr_r} - ${fdt_addr}; - exit; - fi - fi - fi - -done