robert lazarski wrote: <snip>
OK guys, its working!!!! YEAH!!!! Last problem turned out to be an open resistor / bad solder joint on the address bus! We can now erase the flash chip entirely. I also did the prog command to upload uboot.bin and can see the uboot version at the base address - so this stage is now completed!!!! Thanks so much for all the help guys, I doubt we would have gotten so far without this community and we are most grateful! I feel so much smarter now ;-) .
Last question before I get into my code finally - and I'll start a new thread when I start debugging: The bdi docs in the uboot manual seem to stop at the 'go' command. When I type 'info' I get a running state. Can I now just power on and attach a terminal via the serial port to get the uboot shell? To get to that point is the next dragon to slay?
Thanks!!! Robert
Congratulations! Now you're equipped to help the next guy/girl.
Hook up your serial cable and with any luck you'll get something!
regards, Ben