Hi Stefan,
I am using PPC440GX. I did not understood what mean by EEPROM configuration. Do you want to say that board is using data from EEPROM? I believe I am using fix configuration as I am not calling any I2C call in bootloader code.
How to check this hard reset issue.
Thanks in Advance.
Prakash
On Wed, Dec 30, 2009 at 10:51 AM, Stefan Roese sr@denx.de wrote:
On Tuesday 29 December 2009 16:04:28 prakash bedge wrote:
I am facing an error while flashing u-boot on my PPC4xx based board.
What kind of PPC4xx are you using (405EX, 440SP, 440EPx, 460EX...)?
When I flash the u-boot on the PCI board I am developing, and hard reset the board, then the board is not able to boot up. Also I am not able to debug the code as probe connection fails.
Whar are the reason that I should check to see why the board is not
booting
up after hard reset. Is it fault in start.S or somewhere else in code I need to see?
It would be great if someone who already have a solution on this porblem, share his experience.
I suspect some problems with the bootstrap configuration. Are you using a fixed bootstrap option? Or are you using the bootstrap I2C EEPROM? If yes, is this EEPROM configured correctly?
Cheers, Stefan
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de