In the current driver implementation, config() callback is common for AR8035 and AR8031 phy. In config() callback, driver tries to configure MMD Access Control Register and MMD Access Address Data Register unconditionally for both phy versions which leads to auto negotiation failure in AM335x EVMsk second port which uses AR8031 Giga bit RGMII phy. Fixing this by adding separate config for AR8031 phy.
Reviewed-by: Sekhar Nori nsekhar@ti.com Signed-off-by: Mugunthan V N mugunthanvnm@ti.com Acked-by: Joe Hershberger joe.hershberger@ni.com --- drivers/net/phy/atheros.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index e57c412..faf5175 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -8,6 +8,15 @@ */ #include <phy.h>
+#define AR803x_PHY_DEBUG_ADDR_REG 0x1d +#define AR803x_PHY_DEBUG_DATA_REG 0x1e + +#define AR803x_DEBUG_REG_5 0x5 +#define AR803x_RGMII_TX_CLK_DLY 0x100 + +#define AR803x_DEBUG_REG_0 0x0 +#define AR803x_RGMII_RX_CLK_DLY 0x8000 + static int ar8021_config(struct phy_device *phydev) { phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); @@ -17,6 +26,32 @@ static int ar8021_config(struct phy_device *phydev) return 0; }
+static int ar8031_config(struct phy_device *phydev) +{ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { + phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_ADDR_REG, + AR803x_DEBUG_REG_5); + phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG, + AR803x_RGMII_TX_CLK_DLY); + } + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { + phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_ADDR_REG, + AR803x_DEBUG_REG_0); + phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG, + AR803x_RGMII_RX_CLK_DLY); + } + + phydev->supported = phydev->drv->features; + + genphy_config_aneg(phydev); + genphy_restart_aneg(phydev); + + return 0; +} + static int ar8035_config(struct phy_device *phydev) { int regval; @@ -54,7 +89,7 @@ static struct phy_driver AR8031_driver = { .uid = 0x4dd074, .mask = 0xffffffef, .features = PHY_GBIT_FEATURES, - .config = ar8035_config, + .config = ar8031_config, .startup = genphy_startup, .shutdown = genphy_shutdown, };