On 22/09/2012 00:53, Eric Nelson wrote:
Adds support for two LVDS panels and one RGB panel to the SABRE-Lite board: Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1) wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600) wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480)
Auto-detects panel by probing the I2C touch controller of each.
Setting 'panel' environment variable to one of the names above will override auto-detection.
Signed-off-by: Eric Nelson eric.nelson@boundarydevices.com
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 245 ++++++++++++++++++++++++- drivers/video/ipu_common.c | 2 +- include/configs/mx6qsabrelite.h | 15 ++- 3 files changed, 259 insertions(+), 3 deletions(-)
Between V3 and V4 you changed also ipu_common.c, and that change does not apply.
/* address of boot parameters */diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c index cc8f881..5f0a1a8 100644 --- a/drivers/video/ipu_common.c +++ b/drivers/video/ipu_common.c @@ -218,7 +218,7 @@ static struct clk ipu_clk = { #else .enable_reg = (u32 *)(CCM_BASE_ADDR + offsetof(struct mxc_ccm_reg, CCGR3)),
- .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET,
- .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_MASK,
But in ipu_common.c:
.enable_reg = (u32 *)(CCM_BASE_ADDR + offsetof(struct mxc_ccm_reg, CCGR5)), .enable_shift = MXC_CCM_CCGR5_CG5_OFFSET,
I do not see another patch changing that. Am I missing something ?
Best regards, Stefano