Re: [PATCH] include: configs: am64x_evm: Change to using .env

Hi Nikhil,

On 30/03/23 14:12, Nikhil M Jain wrote:

Move to using .env file for setting up environment variables for am65x.This should be AM64 SK

Regards Devarsh

Signed-off-by: Nikhil M Jain n-jain1@ti.com

board/ti/am64x/am64x.env | 63 +++++++++++++++++++++++++++ include/configs/am64x_evm.h | 85 ------------------------------------- 2 files changed, 63 insertions(+), 85 deletions(-) create mode 100644 board/ti/am64x/am64x.env

diff --git a/board/ti/am64x/am64x.env b/board/ti/am64x/am64x.env new file mode 100644 index 0000000000..c3960be38e --- /dev/null +++ b/board/ti/am64x/am64x.env @@ -0,0 +1,63 @@ +#include <environment/ti/ti_armv7_common.env> +#include <environment/ti/mmc.env> +#include <environment/ti/k3_dfu.env>

+findfdt=

• if test $board_name = am64x_gpevm; then

• setenv name_fdt k3-am642-evm.dtb; fi;
  

• if test $board_name = am64x_skevm; then

• setenv name_fdt k3-am642-sk.dtb; fi;
  

• if test $name_fdt = undefined; then

• echo WARNING: Could not determine device tree to use; fi;
  

+name_kern=Image +console=ttyS2,115200n8 +args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} +run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}

+boot=mmc +mmcdev=1 +bootpart=1:2 +bootdir=/boot +rd_spec=- +init_mmc=run args_all args_mmc +get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt} +get_overlay_mmc=

• fdt address ${fdtaddr};
• fdt resize 0x100000;
• for overlay in $name_overlays;
• do;
• load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} &&
• fdt apply ${dtboaddr};
• done;

+get_kern_mmc=load mmc ${bootpart} ${loadaddr}

• ${bootdir}/${name_kern}

+get_fit_mmc=load mmc ${bootpart} ${addr_fit}

• ${bootdir}/${name_fit}

+partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}

+args_usb=run finduuid;setenv bootargs console=${console}

• ${optargs}
• root=PARTUUID=${uuid} rw
• rootfstype=${mmcrootfstype}

+init_usb=run args_all args_usb +get_fdt_usb=load usb ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt} +get_overlay_usb=

• fdt address ${fdtaddr};
• fdt resize 0x100000;
• for overlay in $name_overlays;
• do;
• load usb ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply
• ${dtboaddr};
• done;

+get_kern_usb=load usb ${bootpart} ${loadaddr}

• ${bootdir}/${name_kern}

+get_fit_usb=load usb ${bootpart} ${addr_fit}

• ${bootdir}/${name_fit}

+usbboot=setenv boot usb;

• setenv bootpart 0:2;
• usb start;
• run findfdt;
• run init_usb;
• run get_kern_usb;
• run get_fdt_usb;
• run run_kern;

diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h index 26a7f2521e..1e37ab47b9 100644 --- a/include/configs/am64x_evm.h +++ b/include/configs/am64x_evm.h @@ -18,91 +18,6 @@ /* DDR Configuration */ #define CFG_SYS_SDRAM_BASE1 0x880000000

-#define PARTS_DEFAULT \

• /* Linux partitions */ \
• "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"

-/* U-Boot general configuration */ -#define EXTRA_ENV_AM642_BOARD_SETTINGS \

• "findfdt=" \

• "if test $board_name = am64x_gpevm; then " \
  

• 	"setenv fdtfile k3-am642-evm.dtb; fi; " \
  

• "if test $board_name = am64x_skevm; then " \
  

• 	"setenv fdtfile k3-am642-sk.dtb; fi;" \
  

• "if test $fdtfile = undefined; then " \
  

• 	"echo WARNING: Could not determine device tree to use; fi; \0" \
  

• "name_kern=Image\0" \
• "console=ttyS2,115200n8\0" \
• "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \

• "${mtdparts}\0"						\
  

• "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"

-/* U-Boot MMC-specific configuration */ -#define EXTRA_ENV_AM642_BOARD_SETTINGS_MMC \

• "boot=mmc\0" \
• "mmcdev=1\0" \
• "bootpart=1:2\0" \
• "bootdir=/boot\0" \
• "rd_spec=-\0" \
• "init_mmc=run args_all args_mmc\0" \
• "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
• "get_overlay_mmc=" \

• "fdt address ${fdtaddr};"				\
  

• "fdt resize 0x100000;"					\
  

• "for overlay in $name_overlays;"			\
  

• "do;"							\
  

• "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "	\
  

• "fdt apply ${dtboaddr};"				\
  

• "done;\0"						\
  

• "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \

• "${bootdir}/${name_kern}\0"				\
  

• "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \

• "${bootdir}/${name_fit}\0"				\
  

• "partitions=" PARTS_DEFAULT

-#define EXTRA_ENV_AM642_BOARD_SETTING_USBMSC \

• "args_usb=run finduuid;setenv bootargs console=${console} " \

• "${optargs} "						\
  

• "root=PARTUUID=${uuid} rw "				\
  

• "rootfstype=${mmcrootfstype}\0"				\
  

• "init_usb=run args_all args_usb\0" \
• "get_fdt_usb=load usb ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
• "get_overlay_usb=" \

• "fdt address ${fdtaddr};"				\
  

• "fdt resize 0x100000;"					\
  

• "for overlay in $name_overlays;"			\
  

• "do;"							\
  

• "load usb ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "	\
  

• "fdt apply ${dtboaddr};"				\
  

• "done;\0"						\
  

• "get_kern_usb=load usb ${bootpart} ${loadaddr} " \

• "${bootdir}/${name_kern}\0"				\
  

• "get_fit_usb=load usb ${bootpart} ${addr_fit} " \

• "${bootdir}/${name_fit}\0"				\
  

• "usbboot=setenv boot usb;" \

• "setenv bootpart 0:2;"					\
  

• "usb start;"						\
  

• "run findfdt;"						\
  

• "run init_usb;"						\
  

• "run get_kern_usb;"					\
  

• "run get_fdt_usb;"					\
  

• "run run_kern\0"
  

-#define EXTRA_ENV_DFUARGS \

• DFU_ALT_INFO_MMC \
• DFU_ALT_INFO_EMMC \
• DFU_ALT_INFO_RAM \
• DFU_ALT_INFO_OSPI

-/* Incorporate settings into the U-Boot environment */ -#define CFG_EXTRA_ENV_SETTINGS \

• DEFAULT_LINUX_BOOT_ENV \
• DEFAULT_MMC_TI_ARGS \
• EXTRA_ENV_AM642_BOARD_SETTINGS \
• EXTRA_ENV_AM642_BOARD_SETTINGS_MMC \
• EXTRA_ENV_DFUARGS \
• EXTRA_ENV_AM642_BOARD_SETTING_USBMSC

/* Now for the remaining common defines */ #include <configs/ti_armv7_common.h>