Update imx-atf and firmware-imx to latest released versions.
Update address of ATF_LOAD_ADDR that has changed to 0x490000 in imx-atf commit 48733cb4e773a7584ced601de9d717efa3d73815.
Add 'O=' to make instructions as one issue has been noticed where it was trouble building directly inside u-boot source dir.
Signed-off-by: Peter Bergin peter@berginkonsult.se Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com --- doc/board/freescale/imx8mp_evk.rst | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/doc/board/freescale/imx8mp_evk.rst b/doc/board/freescale/imx8mp_evk.rst index ccffcf7257..5ca3bb8199 100644 --- a/doc/board/freescale/imx8mp_evk.rst +++ b/doc/board/freescale/imx8mp_evk.rst @@ -18,7 +18,7 @@ Get and Build the ARM Trusted firmware
Note: $(srctree) is the U-Boot source directory Get ATF from: https://source.codeaurora.org/external/imx/imx-atf -branch: imx_5.4.47_2.2.0 +branch: imx_5.4.70_2.3.0
.. code-block:: bash
@@ -30,13 +30,13 @@ Get the ddr firmware
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin - $ chmod +x firmware-imx-8.9.bin - $ ./firmware-imx-8.9.bin - $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin - $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin - $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin - $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.bin + $ chmod +x firmware-imx-8.10.bin + $ ./firmware-imx-8.10.bin + $ cp firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_202006.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin + $ cp firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_202006.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin + $ cp firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_202006.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin + $ cp firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_202006.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
Build U-Boot ------------ @@ -44,15 +44,15 @@ Build U-Boot .. code-block:: bash
$ export CROSS_COMPILE=aarch64-poky-linux- - $ make imx8mp_evk_defconfig - $ export ATF_LOAD_ADDR=0x960000 - $ make flash.bin + $ make O=build imx8mp_evk_defconfig + $ export ATF_LOAD_ADDR=0x970000 + $ make O=build flash.bin
Burn the flash.bin to the MicroSD card at offset 32KB:
.. code-block:: bash
- $sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync + $sudo dd if=build/flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync
Boot ----