On 3/25/19 5:07 PM, Marcel Ziswiler wrote:
Hi Stefano
On Wed, 2019-03-13 at 08:28 +0000, sbabic@denx.de wrote:
The phy_connect_dev(...) function from phy.c does all the handling (inclusive catching fixed-link). So we drop here the single steps and call just phy_connect_dev(...). Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com Acked-by: Joe Hershberger joe.hershberger@ni.com
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic
Unfortunately, this commit broke Ethernet on the Vybrid. When re-basing my Colibri VF50/VF61 clean-up patch set ("colibri vybrid fixes, device tree enablement and driver model conversion") I noticed that Ethernet no longer works giving the following error messages:
Net: Could not get PHY for FEC0: addr -19 eth-1: fec@400d1000 Colibri VFxx # dhcp Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 No ethernet found. Could not get PHY for FEC0: addr -19 Colibri VFxx #
Bisecting points to this commit and reverting it indeed makes it work again.
Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)?
Cheers
Marcel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Hi Marcel, does this board use DM ? which defconfig uses the board?
cheers, Hannes