Hello Vasileios,
On 29.10.24 19:58, Vasileios Amoiridis wrote:
From: Vasileios Amoiridis vasileios.amoiridis@cern.ch
Add native support of the bootcount mechanism in the ZynqMP by utilising internal PMU registers. The Persistent Global Storage Registers of the Platform Management Unit can keep their value during reboot cycles unless there is a POR reset, making them appropriate for the bootcount mechanism.
Signed-off-by: Vasileios Amoiridis vasileios.amoiridis@cern.ch
drivers/bootcount/Kconfig | 4 ++++ drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount_zynqmp.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 33 insertions(+) create mode 100644 drivers/bootcount/bootcount_zynqmp.c
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index fa6d8e7128..95b6a9541a 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -82,6 +82,10 @@ config BOOTCOUNT_AT91 bool "Boot counter for Atmel AT91SAM9XE" depends on AT91SAM9XE
+config BOOTCOUNT_ZYNQMP
- bool "Boot counter for Zynq UltraScale+ MPSoC"
- depends on ARCH_ZYNQMP
- config DM_BOOTCOUNT bool "Boot counter in a device-model device" help
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile index 245f879633..487adc1212 100644 --- a/drivers/bootcount/Makefile +++ b/drivers/bootcount/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_BOOTCOUNT_GENERIC) += bootcount.o obj-$(CONFIG_BOOTCOUNT_MEM) += bootcount.o obj-$(CONFIG_BOOTCOUNT_AT91) += bootcount_at91.o +obj-$(CONFIG_BOOTCOUNT_ZYNQMP) += bootcount_zynqmp.o obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o diff --git a/drivers/bootcount/bootcount_zynqmp.c b/drivers/bootcount/bootcount_zynqmp.c new file mode 100644 index 0000000000..9bb801e188 --- /dev/null +++ b/drivers/bootcount/bootcount_zynqmp.c @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// SPDX-FileCopyrightText: 2024 CERN (home.cern)
+#include <bootcount.h> +#include <stdio.h> +#include <zynqmp_firmware.h>
+#define PMU_PERS_GLOB_GEN_STORAGE0 0x00FFD80050
+void bootcount_store(ulong a) +{
- int ret;
- ret = zynqmp_mmio_write(PMU_PERS_GLOB_GEN_STORAGE0, 0xFF, a);
- if (ret)
printf("Failed: mmio write\n");+}
+ulong bootcount_load(void) +{
- int ret;
- u32 val;
- ret = zynqmp_mmio_read(PMU_PERS_GLOB_GEN_STORAGE0, &val);
- if (ret)
printf("Failed: mmio read\n");- return val;
Makes it sense to return val, when ret != 0 ? Maybe val is uninitialzed in this case... at least please return ret.
just Nitpick: Also may at least add the function name to the printf, that you have a chance to see on console output, that bootcount read gone wrong... may the zynqmp_mmio_write/read functions have already an error message on error?
Thanks!
bye, Heiko