Add N1213 cpu core support for NDS32 arch. Included lowlevel_init procedures, and linker scripts.
NDS32 Core N1213 has the following features.
Core: - 16-/32-bit mixable instruction format - 32 general-purpose 32-bit registers - 8-stage pipeline - Dynamic branch prediction - 32/64/128/256 BTB - Return address stack (RAS) - Vector interrupts for internal/external - 3 HW-level nested interruptions - User and super-user mode support - Memory-mapped I/O - Address space up to 4GB
Memory Management Unit: - TLB - Optional hardware page table walker - Two groups of page size support
Memory Subsystem: - I & D cache - I & D local memory (LM)
Bus Interface: - Synchronous/Asynchronous AHB bus: 0, 1 or 2 ports
Note: 1. start.S will start up the CPU core at first, then jump to SoC dependent "lowlevel_init.S" and "watchdog.S" to configure peripheral devices.
2. Replace old "TEXT_BASE" with new "CONFIG_SYS_TEXT_BASE" into Start.S
Signed-off-by: Macpaul Lin macpaul@andestech.com --- Changes for v2: - Add descriptions for other SoC used core N1213 to organize their lowlevel_init.S and start.S. - Replace old "TEXT_BASE" with new "CONFIG_SYS_TEXT_BASE" against the master tree. - Fix upper case varible declartions used in asm/cache.h.
arch/nds32/cpu/n1213/Makefile | 50 +++++ arch/nds32/cpu/n1213/start.S | 449 +++++++++++++++++++++++++++++++++++++++ arch/nds32/cpu/n1213/u-boot.lds | 68 ++++++ 3 files changed, 567 insertions(+), 0 deletions(-) create mode 100644 arch/nds32/cpu/n1213/Makefile create mode 100644 arch/nds32/cpu/n1213/start.S create mode 100644 arch/nds32/cpu/n1213/u-boot.lds
diff --git a/arch/nds32/cpu/n1213/Makefile b/arch/nds32/cpu/n1213/Makefile new file mode 100644 index 0000000..3b81924 --- /dev/null +++ b/arch/nds32/cpu/n1213/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2010 Andes Technology Corporation +# Shawn Lin, Andes Technology Corporation nobuhiro@andestech.com +# Macpaul Lin, Andes Technology Corporation macpaul@andestech.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).o + +START = start.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S new file mode 100644 index 0000000..9549fb2 --- /dev/null +++ b/arch/nds32/cpu/n1213/start.S @@ -0,0 +1,449 @@ +/* + * Andesboot - Startup Code for Whitiger core + * + * Copyright (C) 2006 Andes Technology Corporation + * Copyright (C) 2006 Shawn Lin nobuhiro@andestech.com + * Copyright (C) 2010 Macpaul macpaul@andestech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <version.h> + +!======================================================================== +! Jump vector table for EVIC mode +!======================================================================== + +#define ENA_DCAC 2UL +#define DIS_DCAC ~ENA_DCAC +#define ICAC_MEM_KBF_ISET (0x07) ! I Cache sets per way +#define ICAC_MEM_KBF_IWAY (0x07<<3) ! I cache ways +#define ICAC_MEM_KBF_ISZ (0x07<<6) ! I cache line size +#define DCAC_MEM_KBF_DSET (0x07) ! D Cache sets per way +#define DCAC_MEM_KBF_DWAY (0x07<<3) ! D cache ways +#define DCAC_MEM_KBF_DSZ (0x07<<6) ! D cache line size + +#define PSW $ir0 +#define EIT_INTR_PSW $ir1 /* interruption $PSW */ +#define EIT_PREV_IPSW $ir2 /* previous ... */ +#define EIT_IVB $ir3 /* intr vector base address */ +#define EIT_EVA $ir4 /* MMU related Exception Virtual Address register */ +#define EIT_PREV_EVA $ir5 /* previous $eva */ +#define EIT_ITYPE $ir6 /* interruption type */ +#define EIT_PREV_ITYPE $ir7 /* prev intr type */ +#define EIT_MACH_ERR $ir8 /* machine error log */ +#define EIT_INTR_PC $ir9 /* Interruption PC */ +#define EIT_PREV_IPC $ir10 /* previous $IPC */ +#define EIT_OVL_INTR_PC $ir11 /* overflow interruption PC */ +#define EIT_PREV_P0 $ir12 /* prev $P0 */ +#define EIT_PREV_P1 $ir13 /* prev $p1 */ +#define CR_ICAC_MEM $cr1 /* Insn cache/memory config register */ +#define CR_DCAC_MEM $cr2 /* Data cache/memory config register */ +#define MR_CAC_CTL $mr8 + + +.globl _start + +_start: b reset + b tlb_fill + b tlb_not_present + b tlb_misc + b tlb_vlpt_miss + b cache_parity_error + b debug + b general_exception + b internal_interrupt ! H0I + b internal_interrupt ! H1I + b internal_interrupt ! H2I + b internal_interrupt ! H3I + b internal_interrupt ! H4I + b internal_interrupt ! H5I + + .balign 16 + + +!======================================================================== +! Andesboot Startup Code (reset vector) +! +! 1. bootstrap +! 1.1 reset - start of Andesboot +! 1.2 to superuser mode - as is when reset +! 1.4 Do lowlevel_init +! - (this will jump out to lowlevel_init.S in SoC) +! - (lowlevel_init) +! 1.3 Turn off watchdog timer +! - (this will jump out to watchdog.S in SoC) +! - (turnoff_watchdog) +! 2. Do critical init when reboot (not from mem) +! 3. Relocate andesboot to ram +! 4. Setup stack +! 5. Jump to second stage (start_andesboot) +!======================================================================== + +! Note: TEXT_BASE is defined by the (board-dependent) linker script +_TEXT_BASE: + .word CONFIG_SYS_TEXT_BASE + +.globl _andesboot_start +_andesboot_start: + .word _start + +! Note: andesboot_end is defined by the (board-dependent) linker script +.globl _andesboot_end +_andesboot_end: + .word andesboot_end + +! _andesboot_real_end is the first usable RAM address behind Andesboot +! and the various stacks +.globl _andesboot_real_end +_andesboot_real_end: + .word 0x0badc0de + + +!============================================= +! The bootstrap code of Andesboot +!============================================= + +reset: + +load_lli: +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + jal load_lowlevel_init + jral $p0 +#endif + + ! Set the Whitiger core to superuser mode + ! According to spec, it is already when reset + +turnoff_wtdog: +#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG + jal load_turnoff_watchdog + jral $p0 +#endif + +! Do CPU critical regs init only at reboot, not when booting from ram +#ifdef CONFIG_INIT_CRITICAL + bal cpu_init_crit ! Do CPU critical regs init +#endif +.align 2 +relocate: + ! relocate andesboot to RAM + jal 2f + !la $r0, _start ! $r0 = source start address + !l.w $r2, _andesboot_start ! Andesboot start address + !l.w $r3, _andesboot_end ! Andesboot end address + !sub $r2, $r3, $r2 ! $r2 = size of Andesboot + !l.w $r1, _TEXT_BASE ! $r1 = destination start address + move $r0, $lp + la $p0, _start + la $p1, relocate+4 + sub $p0, $p1, $p0 + sub $r0, $r0, $p0 + + la $p0, _andesboot_end + sub $p0, $p0, $p1 + move $r3, $lp + lw $r3, [$r3+$p0] ! _andesboot_end + addi $p0, $p0, -4 + move $r2, $lp + lw $r2, [$r2+$p0] ! _andesboot_start + sub $r2, $r3, $r2 + addi $p0, $p0, -4 + move $r1, $lp + lw $r1, [$r1+$p0] ! _TEXT_BASE + + ! $r0 = source address + ! $r1 = destination address + ! $r2 = size to copy +copy_loop: + lmw.bim $r3, [$r0], $r10 + smw.bim $r3, [$r1], $r10 + addi $r2, $r2, -32 + bgez $r2, copy_loop + + ! Set up the stack + l.w $p0, _andesboot_end ! Defined by the board linker script + li $p1, CONFIG_STACKSIZE ! (128*1024) defined in config.h + add $sp, $p0, $p1 + + bal flib_init_bss_memory + + ! Jump to start_andesboot (2nd phase) + l.w $p0, __start_andesboot + br $p0 + +__start_andesboot: .word start_andesboot + +!========================================================================= +! Initialize CPU critical registers +! +! 1. Setup control registers +! 1.1 Mask all IRQs +! 1.2 Flush cache and TLB +! 1.3 Disable MMU and cache +! 2. Setup memory timing +!========================================================================= + +cpu_init_crit: + !push ra + move $r0, $lp + ! Disable Interrupts by clear GIE in $PSW reg + setgie.d + + ! Flush caches and TLB + + ! Invalidate caches + bal invalidate_icac + bal invalidate_dcac + + ! Flush TLB + mfsr $p0, $MMU_CFG + andi $p0, $p0, 0x3 ! MMPS + li $p1, 0x2 ! TLB MMU + bne $p0, $p1, 1f + tlbop FlushAll ! Flush TLB + +1: + ! Disable MMU, Dcache + ! Whitiger is MMU disabled when reset + ! Disable the D$ + mfsr $p0, MR_CAC_CTL ! Get the $CACHE_CTL reg + li $p1, DIS_DCAC + and $p0, $p0, $p1 ! Set DC_EN bit + mtsr $p0, MR_CAC_CTL ! write back the $CACHE_CTL reg + isb + + ! RAM is initialized in the dram_init()(board/nds32/cpe.c) + ! Remove the memsetup.S in the board directory. + !pop ra + + move $lp, $r0 +2: + ret + +flib_init_bss_memory: + smw.adm $r4, [$sp], $r6, #0x1 + + la $r4, __bss_start + la $r5, __bss_end + move $r6, #0 +1: + swi.p $r6, [$r4], #4 + blt $r4, $r5, 1b ! Check if done.. + + lmw.bim $r4, [$sp], $r6, #0x1 + ret + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +load_lowlevel_init: + la $r6, lowlevel_init + la $r7, load_lli + 4 + sub $p0, $r6, $r7 + add $p0, $p0, $lp +ret +#endif + +#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG +load_turnoff_watchdog: + la $r6, turnoff_watchdog + la $r7, turnoff_wtdog + 4 + sub $p0, $r6, $r7 + add $p0, $p0, $lp +ret +#endif + + +!======================================================= +! Invalidate I$ +!======================================================= +invalidate_icac: + mfsr $t0, CR_ICAC_MEM ! read $cr1(I CAC/MEM cfg. reg.) configuration + andi $p0, $t0, ICAC_MEM_KBF_ISZ ! Get the ISZ field + beqz $p0, end_flush_icache ! if $p0=0, then no I CAC existed + srli $p0, $p0, 6 ! get $p0 the index of I$ block + addi $t1, $p0, 2 ! $t1= bit width of I cache line size(ISZ) + li $t4, 1 + sll $t5, $t4, $t1 ! get $t5 cache line size + andi $p1, $t0, ICAC_MEM_KBF_ISET ! get the ISET field + addi $t2, $p1, 6 ! $t2= bit width of ISET + andi $p1, $t0, ICAC_MEM_KBF_IWAY ! get bitfield of Iway + srli $p1, $p1, 3 + addi $p1, $p1, 1 ! then $p1 is I way number + add $t3, $t2, $t1 ! SHIFT + sll $p1, $p1, $t3 ! GET the total cache size +ICAC_LOOP: + sub $p1, $p1, $t5 + cctl $p1, L1I_IX_INVAL + bnez $p1, ICAC_LOOP +end_flush_icache: + ret +!======================================================= +! Invalidate D$ +!======================================================= +invalidate_dcac: + mfsr $t0, CR_DCAC_MEM ! read $cr2(D CAC/MEM cfg. reg.) configuration + andi $p0, $t0, DCAC_MEM_KBF_DSZ ! Get the DSZ field + beqz $p0, end_flush_dcache ! if $p0=0, then no D CAC existed + srli $p0, $p0, 6 ! get $p0 the index of D$ block + addi $t1, $p0, 2 ! $t1= bit width of D cache line size(DSZ) + li $t4, 1 + sll $t5, $t4, $t1 ! get $t5 cache line size + andi $p1, $t0, DCAC_MEM_KBF_DSET ! get the DSET field + addi $t2, $p1, 6 ! $t2= bit width of DSET + andi $p1, $t0, DCAC_MEM_KBF_DWAY ! get bitfield of D way + srli $p1, $p1, 3 + addi $p1, $p1, 1 ! then $p1 is D way number + add $t3, $t2, $t1 ! SHIFT + sll $p1, $p1, $t3 ! GET the total cache size +DCAC_LOOP: + sub $p1, $p1, $t5 + cctl $p1, L1D_IX_INVAL + bnez $p1, DCAC_LOOP +end_flush_dcache: + ret + +!======================================================================== +! Interrupt handling +!======================================================================== + +/* + * exception handlers + */ + .align 5 + + .macro SAVE_ALL + ! FIXME: Other way to get PC? + ! FIXME: Update according to the newest spec!! +1: la $r28, 1 + push $r28 + mfsr $r28, PSW ! $PSW + push $r28 + mfsr $r28, EIT_EVA ! $ir1 $EVA + push $r28 + mfsr $r28, EIT_ITYPE ! $ir2 $ITYPE + push $r28 + mfsr $r28, EIT_MACH_ERR ! $ir3 Mach Error + push $r28 + mfsr $r28, EIT_INTR_PSW ! $ir5 $IPSW + push $r28 + mfsr $r28, EIT_PREV_IPSW ! $ir6 prev $IPSW + push $r28 + mfsr $r28, EIT_PREV_EVA ! $ir7 prev $EVA + push $r28 + mfsr $r28, EIT_PREV_ITYPE ! $ir8 prev $ITYPE + push $r28 + mfsr $r28, EIT_INTR_PC ! $ir9 Interruption PC + push $r28 + mfsr $r28, EIT_PREV_IPC ! $ir10 prev Interruption PC + push $r28 + mfsr $r28, EIT_OVL_INTR_PC ! $ir11:OVerflowed interruption PC + push $r28 + mfusr $r28, $d1.lo + push $r28 + mfusr $r28, $d1.hi + push $r28 + mfusr $r28, $d0.lo + push $r28 + mfusr $r28, $d0.hi + push $r28 + pushm $r0,$r30 /* we will also store $sp-$r31, ra-$r30, $gp-$r29, $r28-$fp */ + addi $sp, $sp, -4 ! make room for implicit pt_regs parameters + .endm + + .align 5 +tlb_fill: + SAVE_ALL + move $r0, $sp ! To get the kernel stack + li $r1, 1 ! Determine interruption type + bal do_interruption + + .align 5 +tlb_not_present: + SAVE_ALL + move $r0, $sp ! To get the kernel stack + li $r1, 2 ! Determine interruption type + bal do_interruption + + .align 5 +tlb_misc: + SAVE_ALL + move $r0, $sp ! To get the kernel stack + li $r1, 3 ! Determine interruption type + bal do_interruption + + .align 5 +tlb_vlpt_miss: + SAVE_ALL + move $r0, $sp ! To get the kernel stack + li $r1, 4 ! Determine interruption type + bal do_interruption + + .align 5 +cache_parity_error: + SAVE_ALL + move $r0, $sp ! To get the kernel stack + li $r1, 5 ! Determine interruption type + bal do_interruption + + .align 5 +debug: + SAVE_ALL + move $r0, $sp ! To get the kernel stack + li $r1, 6 ! Determine interruption type + bal do_interruption + + .align 5 +general_exception: + SAVE_ALL + move $r0, $sp ! To get the kernel stack + li $r1, 7 ! Determine interruption type + bal do_interruption + + .align 5 +internal_interrupt: + SAVE_ALL + move $r0, $sp ! To get the kernel stack + li $r1, 8 ! Determine interruption type + bal do_interruption + + .align 5 + +!=========================================== +!void reset_cpu(ulong addr); +! $r0: input address to jump to +!=========================================== +.globl reset_cpu +reset_cpu: +! No need to disable MMU because we never enable it! + + bal invalidate_icac + bal invalidate_dcac + mfsr $p0, $MMU_CFG + andi $p0, $p0, 0x3 ! MMPS + li $p1, 0x2 ! TLB MMU + bne $p0, $p1, 1f + tlbop FlushAll ! Flush TLB +1: + mfsr $p0, MR_CAC_CTL ! Get the $CACHE_CTL reg + li $p1, DIS_DCAC + and $p0, $p0, $p1 ! Clear the DC_EN bit + mtsr $p0, MR_CAC_CTL ! Write back the $CACHE_CTL reg + br $r0 ! Jump to the input address diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds new file mode 100644 index 0000000..3515ce0 --- /dev/null +++ b/arch/nds32/cpu/n1213/u-boot.lds @@ -0,0 +1,68 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (C) 2010 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation nobuhiro@andestech.com + * Macpaul Lin, Andes Technology Corporation macpaul@andestech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-nds32", "elf32-nds32", "elf32-nds32") +OUTPUT_ARCH(nds32) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + arch/nds32/cpu/n1213/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + __bss_end = .; + + . = ALIGN(4); + .rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) } + + andesboot_end = .; + + . = 0x02000000; + .u_boot_ohci_data_st : { *(.u_boot_ohci_data_st) } +}