Try to maintain as much commonality by conditionally including stuff in armv7_common as necessary and removing the common defines from keystone2 header.
Signed-off-by: Nishanth Menon nm@ti.com --- Changes in V2: - common CONFIG_SYS_SDRAM_BASE - common CONFIG_SYS_LOAD_ADDR - rebased to new series
V1: https://patchwork.ozlabs.org/patch/496730/
include/configs/k2e_evm.h | 2 -- include/configs/k2hk_evm.h | 2 -- include/configs/k2l_evm.h | 2 -- include/configs/ti_armv7_common.h | 6 ++++- include/configs/ti_armv7_keystone2.h | 52 +++++++++++------------------------- 5 files changed, 20 insertions(+), 44 deletions(-)
diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index ac50a01b2980..f1e650141ae1 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -15,8 +15,6 @@ #define CONFIG_K2E_EVM
/* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "K2E EVM # " - #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ "addr_mon=0x0c140000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 29e3403aa082..f8e83de64b63 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -15,8 +15,6 @@ #define CONFIG_K2HK_EVM
/* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "K2HK EVM # " - #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ "addr_mon=0x0c5f0000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index 50d5c991a0bb..395608a5f6db 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -15,8 +15,6 @@ #define CONFIG_K2L_EVM
/* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "K2L EVM # " - #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ "addr_mon=0x0c140000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 63244dbc83ff..814da3409c46 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -73,9 +73,13 @@ #ifndef CONFIG_NR_DRAM_BANKS #define CONFIG_NR_DRAM_BANKS 1 #endif + #define CONFIG_SYS_SDRAM_BASE 0x80000000 + +#ifndef CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) +#endif
/* Timer information. */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ @@ -140,7 +144,7 @@ * mtdparts, both for ease of use in U-Boot and for passing information * on to the Linux kernel. */ -#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) +#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) || defined(CONFIG_NAND_DAVINCI) #define CONFIG_MTD_DEVICE /* Required for mtdparts */ #define CONFIG_CMD_MTDPARTS #endif diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index d838f270018b..7d89bd78e43b 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -14,10 +14,7 @@
/* U-Boot Build Configuration */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_THUMB_BUILD
/* SoC Configuration */ #define CONFIG_ARCH_CPU_INIT @@ -28,11 +25,9 @@
/* Memory Configuration */ #define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 #define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ #define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ GENERATED_GBL_DATA_SIZE)
@@ -49,15 +44,10 @@ #define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ CONFIG_SYS_SPL_MALLOC_SIZE + \ CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SPL_FRAMEWORK
/* UART Configuration */ #define CONFIG_SYS_NS16550 @@ -68,13 +58,10 @@ #define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE #define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6) #define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200
/* SPI Configuration */ -#define CONFIG_SPI #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_DAVINCI_SPI -#define CONFIG_CMD_SPI #define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6) #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED @@ -148,7 +135,6 @@ #define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
/* I2C Configuration */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_DAVINCI #define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ @@ -185,7 +171,6 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x100000 #define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE #define CONFIG_RBTREE #define CONFIG_LZO #define MTDIDS_DEFAULT "nand0=davinci_nand.0" @@ -197,8 +182,6 @@ #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_KEYSTONE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION #define CONFIG_FS_FAT #define CONFIG_SYS_CACHELINE_SIZE 64 @@ -208,39 +191,25 @@ #define CONFIG_USB_PHY_CFG_BASE KS2_USB_PHY_CFG_BASE
/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_CMD_SF #define CONFIG_CMD_EEPROM #define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC
/* U-Boot general configuration */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_MISC_INIT_R -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE 2048 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP #define CONFIG_CRC32_VERIFY #define CONFIG_MX_CYCLIC -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE #define CONFIG_TIMESTAMP
/* EDMA3 */ #define CONFIG_TI_EDMA3
-#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ @@ -301,14 +270,23 @@ #define CONFIG_BOOTARGS \
/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP -#define CONFIG_SYS_BARGSIZE 1024 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
-#define CONFIG_SUPPORT_RAW_INITRD + +/* Now for the remaining common defines */ +#include <configs/ti_armv7_common.h> + +/* We wont be loading up OS from SPL for now.. */ +#undef CONFIG_SPL_OS_BOOT +/* We do not have MMC SPL support.. yet.. */ +#undef CONFIG_SPL_LIBDISK_SUPPORT +#undef CONFIG_SPL_MMC_SUPPORT +#undef CONFIG_SPL_FAT_SUPPORT +#undef CONFIG_SPL_EXT_SUPPORT + +/* And no support for GPIO, yet.. */ +#undef CONFIG_SPL_GPIO_SUPPORT +#undef CONFIG_CMD_GPIO
/* we may include files below only after all above definitions */ #include <asm/arch/hardware.h>