26 Feb
2013
26 Feb
'13
3:21 p.m.
Hi Benoît,
On Tue, Feb 26, 2013 at 10:35 AM, Fabio Estevam festevam@gmail.com wrote:
Yes, after using the same IOMUX from FSL U-boot I get:
NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3) NAND bus width 16 instead 8 bit No NAND device found!!! 0 MiB
This should be fixed separetely and it is not related to your patch. I will submit a patch for this 16-bit detection issue
I was able to read and write to NAND, I have also tested to save env vars into NAND and it works fine.
So, after changing the IOMUX as per FSL U-boot you can add my:
Tested-by: Fabio Estevam fabio.estevam@freescale.com