Objective of this target to have concatenate binary having - SPL binary in PBL command format - U-boot binary
Signed-off-by: Prabhakar Kushwaha prabhakar@freescale.com --- Changes for v2: Updated target
Makefile | 12 ++++++++++++ README | 4 ++++ 2 files changed, 16 insertions(+)
diff --git a/Makefile b/Makefile index ecac292..6aac95a 100644 --- a/Makefile +++ b/Makefile @@ -706,7 +706,11 @@ ALL-y += u-boot.srec u-boot.bin System.map
ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin +ifeq ($(CONFIG_RAMBOOT_SPLPBL),y) +ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin +else ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl +endif ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin @@ -835,6 +839,14 @@ OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE $(call if_changed,pad_cat)
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.bin u-boot.bin + tools/mkimage -n $(CONFIG_SYS_FSL_PBL_RCW) \ + -R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage \ + -d $< $@ + $(OBJCOPY) -I binary -O binary \ + --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff $@ + cat u-boot.bin >> $@ + SPL: spl/u-boot-spl.bin FORCE $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
diff --git a/README b/README index 413a844..91ef97c 100644 --- a/README +++ b/README @@ -486,6 +486,10 @@ The following options need to be configured: PBI commands can be used to configure SoC before it starts the execution. Please refer doc/README.pblimage for more details
+ CONFIG_RAMBOOT_SPLPBL + It adds a target to create boot binary having SPL binary in PBI format + concatenated with u-boot binary. + CONFIG_SYS_FSL_DDR_BE Defines the DDR controller register space as Big Endian