Hi Heiko,
Hello Lukasz,
Am 16.07.2013 09:41, schrieb Lukasz Majewski:
Hi Heiko,
updating an ubi partition needs a completely erased mtd partition, see: http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html
So, add partubi alt setting for the dfu_alt_info environment variable to mark this partition as an ubi partition. In case we update an ubi partition, we erase after flashing the image into the partition, the remaining sektors.
Signed-off-by: Heiko Schocherhs@denx.de Cc: Pantelis Antonioupanto@antoniou-consulting.com Cc: Tom Rinitrini@ti.com Cc: Lukasz Majewskil.majewski@samsung.com Cc: Kyungmin Parkkyungmin.park@samsung.com Cc: Marek Vasutmarex@denx.de Cc: Wolfgang Denkwd@denx.de
- This patch is also a good starting point to fix up updating ubi,
as we currently use "nand erase" for erasing the sektors. This is not the prefered way for writing an ubi image, see: http://www.linux-mtd.infradead.org/faq/ubi.html#L_flash_img
This must be fixed ... we have no "ubiformat" in u-boot, or?
- changes for v2:
- do not use spread = 1 for nand_erase_opts, to prevent errormessage if there are bad blocks in the erase range.
drivers/dfu/dfu.c | 30 +++++++++++++++++++++++++++++- drivers/dfu/dfu_nand.c | 26 ++++++++++++++++++++++++++ include/dfu.h | 2 ++ 3 Dateien geändert, 57 Zeilen hinzugefügt(+), 1 Zeile entfernt(-)
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 0521752..7ba7026 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -23,6 +23,7 @@ #include<errno.h> #include<malloc.h> #include<mmc.h> +#include<nand.h> #include<fat.h> #include<dfu.h> #include<linux/list.h> @@ -176,6 +177,34 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) ret = dfu->flush_medium(dfu); printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
/* in case of ubi partition, erase rest of thepartition */
if (dfu->ubi == 1) {int ret;nand_info_t *nand;/* erase complete partition */nand_erase_options_t opts;if (nand_curr_device< 0 ||nand_curr_device>=CONFIG_SYS_MAX_NAND_DEVICE ||
^^^^^^^^^^^^^^^^^^^^^^^^^^^ - this config won't be defined at devices, which don't have NAND memory (like Trats). Due to that Trats board is not building.
Please remove memory type dependent code from the common dfu code.
Oh... Hmm... maybe I move this code to drivers/dfu/dfu_nand.c and make there a dfu_nand_flush() ?
Sounds like a good idea :-). I would prefer to encapsulate NAND (MMC) code at dfu_nand.c (dfu_mmc.c) file.
bye, Heiko