Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com Reviewed-by: Patrice Chotard patrice.chotard@st.com ---
(no changes since v1)
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 ++++++++++++-------------- 1 file changed, 19 insertions(+), 21 deletions(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index 47fe61090d..9624583b8c 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -4,12 +4,15 @@ * Author: Christophe Kerello christophe.kerello@st.com */
+#define LOG_CATEGORY UCLASS_MTD + #include <common.h> #include <clk.h> #include <dm.h> #include <log.h> #include <nand.h> #include <reset.h> +#include <dm/device_compat.h> #include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/delay.h> @@ -324,7 +327,7 @@ static int stm32_fmc2_nfc_ham_calculate(struct mtd_info *mtd, const u8 *data, ret = readl_poll_timeout(nfc->io_base + FMC2_SR, sr, sr & FMC2_SR_NWRF, FMC2_TIMEOUT_5S); if (ret < 0) { - pr_err("Ham timeout\n"); + log_err("Ham timeout\n"); return ret; }
@@ -409,7 +412,7 @@ static int stm32_fmc2_nfc_bch_calculate(struct mtd_info *mtd, const u8 *data, ret = readl_poll_timeout(nfc->io_base + FMC2_BCHISR, bchisr, bchisr & FMC2_BCHISR_EPBRF, FMC2_TIMEOUT_5S); if (ret < 0) { - pr_err("Bch timeout\n"); + log_err("Bch timeout\n"); return ret; }
@@ -457,7 +460,7 @@ static int stm32_fmc2_nfc_bch_correct(struct mtd_info *mtd, u8 *dat, ret = readl_poll_timeout(nfc->io_base + FMC2_BCHISR, bchisr, bchisr & FMC2_BCHISR_DERF, FMC2_TIMEOUT_5S); if (ret < 0) { - pr_err("Bch timeout\n"); + log_err("Bch timeout\n"); return ret; }
@@ -795,26 +798,24 @@ static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc, ofnode node)
nand->ncs /= sizeof(u32); if (!nand->ncs) { - pr_err("Invalid reg property size\n"); + log_err("Invalid reg property size\n"); return -EINVAL; }
ret = ofnode_read_u32_array(node, "reg", cs, nand->ncs); if (ret < 0) { - pr_err("Could not retrieve reg property\n"); + log_err("Could not retrieve reg property\n"); return -EINVAL; }
for (i = 0; i < nand->ncs; i++) { if (cs[i] >= FMC2_MAX_CE) { - pr_err("Invalid reg value: %d\n", - nand->cs_used[i]); + log_err("Invalid reg value: %d\n", nand->cs_used[i]); return -EINVAL; }
if (nfc->cs_assigned & BIT(cs[i])) { - pr_err("Cs already assigned: %d\n", - nand->cs_used[i]); + log_err("Cs already assigned: %d\n", nand->cs_used[i]); return -EINVAL; }
@@ -837,12 +838,12 @@ static int stm32_fmc2_nfc_parse_dt(struct udevice *dev, nchips++;
if (!nchips) { - pr_err("NAND chip not defined\n"); + log_err("NAND chip not defined\n"); return -EINVAL; }
if (nchips > 1) { - pr_err("Too many NAND chips defined\n"); + log_err("Too many NAND chips defined\n"); return -EINVAL; }
@@ -918,24 +919,21 @@ static int stm32_fmc2_nfc_probe(struct udevice *dev)
addr = dev_read_addr_index(dev, mem_region); if (addr == FDT_ADDR_T_NONE) { - pr_err("Resource data_base not found for cs%d", - chip_cs); + dev_err(dev, "Resource data_base not found for cs%d", chip_cs); return ret; } nfc->data_base[chip_cs] = addr;
addr = dev_read_addr_index(dev, mem_region + 1); if (addr == FDT_ADDR_T_NONE) { - pr_err("Resource cmd_base not found for cs%d", - chip_cs); + dev_err(dev, "Resource cmd_base not found for cs%d", chip_cs); return ret; } nfc->cmd_base[chip_cs] = addr;
addr = dev_read_addr_index(dev, mem_region + 2); if (addr == FDT_ADDR_T_NONE) { - pr_err("Resource addr_base not found for cs%d", - chip_cs); + dev_err(dev, "Resource addr_base not found for cs%d", chip_cs); return ret; } nfc->addr_base[chip_cs] = addr; @@ -985,14 +983,14 @@ static int stm32_fmc2_nfc_probe(struct udevice *dev) * ECC sector size = 512 */ if (chip->ecc.mode != NAND_ECC_HW) { - pr_err("Nand_ecc_mode is not well defined in the DT\n"); + dev_err(dev, "Nand_ecc_mode is not well defined in the DT\n"); return -EINVAL; }
ret = nand_check_ecc_caps(chip, &stm32_fmc2_nfc_ecc_caps, mtd->oobsize - FMC2_BBM_LEN); if (ret) { - pr_err("No valid ECC settings set\n"); + dev_err(dev, "No valid ECC settings set\n"); return ret; }
@@ -1045,6 +1043,6 @@ void board_nand_init(void) DM_GET_DRIVER(stm32_fmc2_nfc), &dev); if (ret && ret != -ENODEV) - pr_err("Failed to initialize STM32 FMC2 NFC controller. (error %d)\n", - ret); + log_err("Failed to initialize STM32 FMC2 NFC controller. (error %d)\n", + ret); }