From: Stefan Agner stefan.agner@toradex.com
Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT.
Signed-off-by: Stefan Agner stefan.agner@toradex.com
---
common/spl/Kconfig | 31 +++++++++++++++++++------------ configs/am335x_evm_usbspl_defconfig | 1 + drivers/Makefile | 7 +++---- drivers/usb/gadget/Makefile | 3 ++- 4 files changed, 25 insertions(+), 17 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 54bcba3..7d0aec0 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -465,17 +465,6 @@ config SPL_SPI_SUPPORT enable SPI drivers that are needed for other purposes also, such as a SPI PMIC.
-config SPL_USBETH_SUPPORT - bool "Support USB Ethernet drivers" - depends on SPL - help - Enable access to the USB network subsystem and associated - drivers in SPL. This permits SPL to load U-Boot over a - USB-connected Ethernet link (such as a USB Ethernet dongle) rather - than from an onboard peripheral. Environment support is required - since the network stack uses a number of environment variables. - See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT. - config SPL_USB_HOST_SUPPORT bool "Support USB host drivers" depends on SPL @@ -497,9 +486,27 @@ config SPL_USB_SUPPORT config options. This enables loading from USB using a configured device.
+config SPL_USB_GADGET_SUPPORT + bool "Suppport USB Gadget drivers" + depends on SPL + help + Enable USB Gadget API which allows to enable USB device functions + in SPL. + +config SPL_USBETH_SUPPORT + bool "Support USB Ethernet drivers" + depends on SPL_GADGET_SUPPORT + help + Enable access to the USB network subsystem and associated + drivers in SPL. This permits SPL to load U-Boot over a + USB-connected Ethernet link (such as a USB Ethernet dongle) rather + than from an onboard peripheral. Environment support is required + since the network stack uses a number of environment variables. + See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT. + config SPL_DFU_SUPPORT bool "Support DFU (Device Firmware Upgarde)" - depends on SPL + depends on SPL_GADGET_SUPPORT select SPL_HASH_SUPPORT help This feature enables the DFU (Device Firmware Upgarde) in SPL with diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig index 8c28e28..fdb6f77 100644 --- a/configs/am335x_evm_usbspl_defconfig +++ b/configs/am335x_evm_usbspl_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_GADGET_SUPPORT=y CONFIG_SPL_USBETH_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/drivers/Makefile b/drivers/Makefile index 38885eb..2f8f333 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -33,11 +33,10 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ -obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/ -obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/ -obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/udc/ +obj-$(CONFIG_USB_DWC3) += usb/dwc3/ +obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ +obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/ -obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/dwc3/ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 5b18e8c..0fbbb7c 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += g_dnl.o obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o endif
@@ -21,8 +22,8 @@ obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o obj-$(CONFIG_CI_UDC) += ci_udc.o -obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o ifndef CONFIG_SPL_BUILD +obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o