On 11/18/21 09:19, Stefan Roese wrote:
This function is not referenced in mainline U-Boot. Let's remove now.
Signed-off-by: Stefan Roese sr@denx.de
Applied to u-boot-marvell/next
Thanks, Stefan
drivers/ddr/marvell/axp/ddr3_hw_training.h | 1 - drivers/ddr/marvell/axp/ddr3_init.c | 24 ---------------------- drivers/ddr/marvell/axp/ddr3_init.h | 1 - 3 files changed, 26 deletions(-)
diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h index 30daaa9831b9..fcdef792c76a 100644 --- a/drivers/ddr/marvell/axp/ddr3_hw_training.h +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h @@ -373,7 +373,6 @@ int ddr3_load_dqs_patterns(MV_DRAM_INFO *dram_info);
void ddr3_static_training_init(void);
-u8 ddr3_get_eprom_fabric(void); void ddr3_set_performance_params(MV_DRAM_INFO *dram_info); int ddr3_dram_sram_burst(u32 src, u32 dst, u32 len); void ddr3_save_training(MV_DRAM_INFO *dram_info); diff --git a/drivers/ddr/marvell/axp/ddr3_init.c b/drivers/ddr/marvell/axp/ddr3_init.c index 607f3e12c3ae..c5aa1ac18f51 100644 --- a/drivers/ddr/marvell/axp/ddr3_init.c +++ b/drivers/ddr/marvell/axp/ddr3_init.c @@ -943,30 +943,6 @@ int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type) return 0; }
-#if defined(DB_88F78X60_REV2) -/*
- Name: ddr3_get_eprom_fabric - Get Fabric configuration from EPROM
- Desc:
- Args: twsi Address
- Notes: Only Available for ArmadaXP DB Rev2 boards
- Returns: None.
- */
-u8 ddr3_get_eprom_fabric(void) -{ -#ifdef AUTO_DETECTION_SUPPORT
- u8 data = 0;
- int ret;
- ret = i2c_read(NEW_FABRIC_TWSI_ADDR, 1, 1, (u8 *)&data, 1);
- if (!ret)
return data & 0x1F;-#endif
- return 0;
-}
-#endif
- /*
- Name: ddr3_cl_to_valid_cl - this return register matching CL value
- Desc:
diff --git a/drivers/ddr/marvell/axp/ddr3_init.h b/drivers/ddr/marvell/axp/ddr3_init.h index 569a14b7184f..9a21886ac3e7 100644 --- a/drivers/ddr/marvell/axp/ddr3_init.h +++ b/drivers/ddr/marvell/axp/ddr3_init.h @@ -98,7 +98,6 @@ int ddr3_hw_training(u32 target_freq, u32 ddr_width,
void ddr3_print_version(void); void fix_pll_val(u8 target_fab); -u8 ddr3_get_eprom_fabric(void); u32 ddr3_get_fab_opt(void); u32 ddr3_get_cpu_freq(void); u32 ddr3_get_vco_freq(void);
Viele Grüße, Stefan Roese