Re: [U-Boot-Users] [PATCH] SPI relocation fix

Hello David,

David Ho wrote:

This is required to relocate SPI on the MPC852T. Presumably, similar fix is required for relocating I2C.

I assume you've applied my patch, correct?

Normally, at the powerup rpbase should be set to the default values, so no programming is required. Otherwise, the microcode patch downloading code is programming them correctly.

Are you sure you really need these? Could it be that you somehow hve overwritten the parameter area? What are the values in rpbase if you do not set them explicitly?

As I said, I do use MPC852T and everything works fine.

Happy hacking, Vladimir