On 1/15/24 15:05, Patrick Delaunay wrote:
Activate the command stboard for stm32mp25 STMicroelectronics boards, add the default used OTP identifier and the associated board identifier:
- stm32mp25xx-ev1 = MB1936
- stm32mp25xx-dk = MB1605
Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com
Changes in v2:
- fix CONFIG name with 'x': TARGET_ST_STM32MP15x TARGET_ST_STM32MP13x
arch/arm/mach-stm32mp/include/mach/stm32.h | 1 + board/st/common/Kconfig | 2 +- board/st/common/cmd_stboard.c | 2 ++ 3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index 45c929aa605d..726c390977e3 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -198,6 +198,7 @@ enum forced_boot_mode { #define BSEC_OTP_SERIAL 5 #define BSEC_OTP_RPN 9 #define BSEC_OTP_PKG 122 +#define BSEC_OTP_BOARD 246 #define BSEC_OTP_MAC 247 #endif
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig index c1c254d07354..f40d1a78ca36 100644 --- a/board/st/common/Kconfig +++ b/board/st/common/Kconfig @@ -1,7 +1,7 @@ config CMD_STBOARD bool "stboard - command for OTP board information" depends on ARCH_STM32MP
- default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x
- default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x help This compile the stboard command to read and write the board in the OTP.
diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c index 853ab78bbf16..cb103e69b369 100644 --- a/board/st/common/cmd_stboard.c +++ b/board/st/common/cmd_stboard.c @@ -49,7 +49,9 @@ static bool check_stboard(u16 board) 0x1298, 0x1341, 0x1497,
0x1605, /* stm32mp25xx-dk */0x1635,
0x1936, /* stm32mp25xx-ev1 */};
for (i = 0; i < ARRAY_SIZE(st_board_id); i++)
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
Thanks