index dd0b761..6d18e7f 100755 --- a/MAKEALL +++ b/MAKEALL @@ -595,11 +595,12 @@ LIST_at91=" \ at91sam9260ek \ at91sam9261ek \ at91sam9263ek \
- at91sam9g10ek \
- at91sam9g10ek \
again please do this in an other patch
at91sam9g20ek \ at91sam9m10g45ek \ at91sam9rlek \ cmc_pu2 \
- cpuat91 \ csb637 \ kb9202 \ meesc \
diff --git a/Makefile b/Makefile index ac844a7..655cb03 100644 --- a/Makefile +++ b/Makefile @@ -2673,6 +2673,18 @@ at91rm9200ek_config : unconfig cmc_pu2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+cpuat91_ram_config \ +cpuat91_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _ram_,$@)" ] ; then \
echo "#define CONFIG_CPUAT91_RAM 1" >>$(obj)include/config.h ; \
NACK no new config for this you must use the current one
$(XECHO) "... CPUAT91 configured for RAM" ; \- else \
echo "#define CONFIG_BOOTDELAY 1" >>$(obj)include/config.h ;\$(XECHO) "... CPUAT91 configured for Flash" ;\- fi;
- @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
csb637_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
<nip>
+#ifndef __CONFIG_H +#define __CONFIG_H
+#if defined(CONFIG_CPUAT91_RAM) +#define CONFIG_SKIP_LOWLEVEL_INIT 1 +#define CONFIG_SKIP_RELOCATE_UBOOT 1 +#endif
+#define AT91C_MAIN_CLOCK 179712000 +#define AT91C_MASTER_CLOCK 59904000
+#define AT91_SLOW_CLOCK 32768
+#define CONFIG_ARM920T 1 +#define CONFIG_AT91RM9200 1 +#define CONFIG_AT91RM9200DK 1
you are not a DK please fix it
+#define CONFIG_CPUAT91 1
+#undef CONFIG_USE_IRQ +#define USE_920T_MMU 1
+#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 +/* flash */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
+/* clocks */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock */
+/* sdram */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as D16/D31 */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x2188C155 /* set up the SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+/* define one of these to choose the DBGU, USART0 or USART1 as console */ +#define CONFIG_AT91RM9200_USART 1 +#define CONFIG_DBGU 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1
+#undef CONFIG_HWFLOW +#undef CONFIG_MODEM_SUPPORT
no need please remove
+#define CONFIG_HARD_I2C 1
+#if defined(CONFIG_HARD_I2C) +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +#endif
+#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_MII 1 +#define CONFIG_CMD_CACHE 1 +#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NFS
please fix the whitespace too
Best Regards, J.